Swann SW111-WIP Bruksanvisning
Swann
övervakningskamera
SW111-WIP
Läs gratis den bruksanvisning för Swann SW111-WIP (24 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 12 recensioner. Har du en fråga om Swann SW111-WIP eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/24
IP-3G ConnectCam 1000™
Wireless Network Camera
SW111-WIP
SW211-WIP
USER MANUAL
Version 1.0
- 1 -
Contents
Introduction..........................................................................2
Installation ...........................................................................3
Using Ultra View ..................................................................6
To launch the program.....................................................6
Item features....................................................................7
To add a camera............................................................12
To remove a camera......................................................15
To link to the Web page of the camera..........................15
To record video..............................................................16
To configure the recording settings ...............................18
To playback the recorded video.....................................20
To set up motion detection options................................21
Information.....................................................................23
- 2 -
I NTRODUCTION
This Software User Guide provides detailed instructions on
operating Ultra View, a customized software application with a
user-friendly interface allowing you to access and control your
camera(s). You can connect up to 16 cameras to monitor different
places and record events for each camera. With Ultra View, you
can also change some basic settings of the camera, such as
schedule profiles and motion detecting. In addition, if your camera
supports advanced features, such as audio or pan/tilt function,
you can use these functions through the control panels of Ultra
View.
To use Ultra View, you must install it on to your computer. It is
recommended to use a high performance computer if you want to
connect multiple cameras simultaneously. The following provides
suggested system requirements:
Platform: Microsoft® Windows® 2000/XP/Vista.
Hardware Requirement:
1 camera connected: Intel Pentium III 800MHz; 512MB RAM
2 ~ 4 cameras connected: Intel Pentium 4 1.3GHz; 512MB
RAM
5 ~ 8 cameras connected: Intel Pentium 4 2.4GHz; 1GB RAM
9 ~ 16 cameras connected: Intel Pentium 4 3.4GHz; 2GB
RAM
Resolution: 1024x768 or above
NOTE When you use Ultra View to record video clips, store the
recorded files to an exclusive hard disk drive in your
computer to ensure there will be sufficient storage space.
Produktspecifikationer
| Varumärke: | Swann |
| Kategori: | övervakningskamera |
| Modell: | SW111-WIP |
Behöver du hjälp?
Om du behöver hjälp med Swann SW111-WIP ställ en fråga nedan och andra användare kommer att svara dig
övervakningskamera Swann Manualer
13 Juni 2025
12 Juni 2025
3 Oktober 2024
16 September 2024
16 September 2024
15 September 2024
9 September 2024
9 September 2024
9 September 2024
8 September 2024
övervakningskamera Manualer
- Tenda
- Lumens
- American Dynamics
- Netatmo
- Genius
- Elro
- Ubiquiti Networks
- Mach Power
- Gewiss
- Stabo
- Bosch
- Konig
- Beafon
- Laserliner
- Security Labs
Nyaste övervakningskamera Manualer
15 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025
2 Juni 2025