Tach-It 6115 Bruksanvisning
Tach-It
ej kategoriserat
6115
Läs gratis den bruksanvisning för Tach-It 6115 (9 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 2 recensioner. Har du en fråga om Tach-It 6115 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/9
INSTRUCTION MANUAL FOR
MODEL #6115, 6180 and 6605
DEFINITE LENGTH TAPE DISPENSER
Ben Clements and Sons, Inc. / Clements Industries, Inc.
50 Ruta Court, South Hackensack, New Jersey 07606 USA
Tel: 201‐ ‐440 5500 Toll Free: 800 5540 Fax: 201‐ ‐222 ‐ ‐440 1455
Email: sales@tach‐it.com Website: www.tach‐it.com
Copyright Ben Clements and Sons, Inc. and Clements Industries, Inc. February 2020
OverviewandModes ‐(Manual, Semi Automa c and Automa c):
TheTach‐It fromModel length ve#6180is a definite tapedispenserforuseinfeedingand sensicungpressure tapesranginginwidth
2 3 a top1/4”to 1/8”andfrom1”to39.4”inlength.Thisunithas smalltable design,andwillfeedand
cut most types of tapes used in
shipping,assembly, pressurewire most applicaharnessing,industrial,retailand other onswhere sensivetapeisused.
Thereis an adjustment knobon ofthetop themachinetoaccommodatediff erent thicknesses of tapes.
4 presetsmemory forlengthareeasily
accessed as partoftheControlPaneloftheModel#6180
The which of on ofTach‐ItModel#6180has a uniquecradledevice holdstheroll tape.Thisallowsforuse tapes withanycorediameterand
with a maximumrolldiameterofupto11.75”Oponallarge
roll stands are available and sold separately.
The uses onModel#6180 standard110 220voltelectricityandrequires air.no voltunitsareavailable a specialorderbasis.
Tach‐It fullalsomanufacturer’s alineofmanual, automasemi‐ c, automa c and carousel type definite length tape
dispensersandplease
contactTach‐Itoryour ‐ ‐local Tach It distributor for informa on on their full line of pressure sensi ve tape dispenser and applica ng equip
mentforuseinall industries.
The
Model #6180 works in 3 different modes:
Manual: Theoperatorpresses desiredandholdsthefeed onbu un l the
lengthisreachedandthenpressesthecutbuonforthetapeto
becut.
Semi‐Automac: Usingthe thearrowbuonslocatedon ofthe top themachine operatorpre‐determines of Thethelength tapetobefed.
lengthcanbeseenintheLED located
on ofthe top the the themachineand LEDdisplays lengthtobefedinmillimeterincrements(there
are25.4 mm to an inch).When pushesthe thetapeisneeded operator thecutbuon on of thetop ‐the unit, the pre determined length of
tapeisfed
‐and cut wai ng for the operator to remove.The next piece of tape is fed and cut when the operator presses the cut bu on lo
catedon ofthetop themachineagain.
Automac: Usingthe thearrowbuonslocatedon ofthe top themachine operator
‐ pre determines the length of tape to be fed.The
lengthcanbeseeninthe the theLED located on top of machine and the LED displays the length to be fed in millimeter increments (there
are25.4 mm to the an inch).Oncesetinautoma c mode,
tapeisfedandcut.When the operator ‐removes the presented piece of pre cut
tapethe tonextpieceisfedandcut thepre‐determined length.
Modechangesare accomplished bypushing a buon of oflocatedonthetop themachinemarkedM/A.Seethefigure
thecontrolpanel
above.Indicator lights display which mode the Model #6180 is in.
Manualindicatoris illuminated—Manual mode as describedabove
‐ Manual and Auto indicators are illuminated—Semi Automa c mode as described above.
Autoindicatorisilluminated—Automa c mode as describedabove.
Pleasenotethatthephotosshown the theand modelreferencedinthismanualarefor
Model#6180 informabutall on except specifica ons arethesameforall 3 models.
1)Before make onoperangthismachine suretoreadandunderstandthecompleteinstruc manual.
2)Neverhave havethepower or ofcordofthismachineplugged anyintoanoutletwhen covers thecuerassembly thismachine been
removed.
3)Installandoperatethismachineonly
on a flat, level and dry surface.
4)Useonlythespecified electrical powerinputwiththismachine.
5)Alwaysturnthepower or ofoffandunplug tothismachineprior clearinganytape tape thejamsfrom machine,parcularlyintheareas
thecuersand
feed mechanisms.
6)Alwayskeephand, clothing, jewelry and hair away from all moving parts of this machine.
7)Thismachinehas any a verysharp Neverguillo er assembly.necu puthandsor of oranyotherpart thebody otheritemintothe
cueropeningunless
themachineisoffand hasthepower beenunplugged.
8)Never covers removed.operatethismachinewithanyofthesafety
9)Keep cleanthismachine and atdry allmes.
10)Service on thismachine should onlybe performed by factory trained authorized service personnel.
11)Neverusethis
machine for other than its intendedpurposeof offeedingandcungpressure Usesensivetapes. thismachinefor
otherthan the theitsintendedpurposescancauseharmto operator, machineand and and impliedtotheproduct willvoidallactual
warranes. Please contactthe
manufacturerif there areanyquesons as towhetherthismachinecanbeusedfor a parcular
Cauons:
Specificaons:
#6115 #6180 #6605
Dimensions:
Length8"(203 (229 (260mm)9" mm)101/2" mm)
Width5"(127mm) mm) 7 1/2"(191 (230mm)9"
Height5 51/2"(130mm)6"(152mm) 1/2"(140mm)
Weight 7 1/2 1/2 1/2Lbs(3.5Kgs)11 Lbs(5.2Kgs)15 Lbs(7
Kgs)
Power
Power 110/220 VoltVAC50/60
Hzs
Power 110/220 VoltVAC50/60
Hzs
Power 110/220 VoltVAC50/60
Hzs
MinimumTapeWidth1/4" 1/4" 3/4"(6.35mm) 2(57mm) (20mm)
MaximumTapeWidth2" 6"(50 (79mm) 3 1/8" mm) (150mm)
MinimumTapeLength1/2"(12.5
mm) mm)1"(25.4 3/4"(20mm)
MaximumTapeLength39.3" 39.3" 39.3"(999mm) (999mm) (999mm)
MaximumRoll mm) mm)Diameter6" 11(152mm) 3/4"(298 12"(300
CoreSize3"(75mm)Cradle CradleDesign‐notapplicable Design‐notapplicable
Produktspecifikationer
| Varumärke: | Tach-It |
| Kategori: | ej kategoriserat |
| Modell: | 6115 |
Behöver du hjälp?
Om du behöver hjälp med Tach-It 6115 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Tach-It Manualer
24 Augusti 2025
ej kategoriserat Manualer
- True Blue Power
- ART
- Parallels
- Tributaries
- Doktorvolt
- Sirus
- Mercusys
- Olivetti
- NOCO
- Minuteman
- Aurora
- Helix
- Toolcraft
- Plus More
- Exquisit
Nyaste ej kategoriserat Manualer
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025