Targus AKP11US Bruksanvisning

Läs gratis den bruksanvisning för Targus AKP11US (4 sidor) i kategorin Tangentbord. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 1.5 recensioner. Har du en fråga om Targus AKP11US eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
User Guide
N2953
410-1837-009A / AKP11AU
1 YEAR LIMITED WARRANTY: We pride ourselves
on the quality of our products. For complete warranty
details and a list of our worldwide offices, please visit
www.targus.com. Features and specifications are sub-
ject to change without notice. Microsoft, Windows,
Windows Vista, Excel and Access are registered
trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries. Mac is a
trademark of Apple Inc., registered in the U.S. and other
countries. Intuit QuickBooks and Intuit TurboTax are
registered trademarks of Intuit Inc. All trademarks and
registered trademarks are the property of their respec-
tive owners. ©2009 Targus Group International, Inc.
Targus Wireless Numeric Keypad
2
Targus Wireless Numeric Keypad
3
Introduction
Thank you for your purchase of the Targus Wireless Numeric Keypad. This
keypad is designed with a storable USB receiver, providing ease of use
when travelling.
System Requirements
Hardware
• USB port
Operating System
• Microsoft Windows® 2000
• Microsoft Windows® XP
• Microsoft Windows Vista®
• Microsoft Windows® 7
• Mac OS® X 10.4 or later
Contents
Targus Wireless Numeric Keypad
• 1 x AAA Battery
• 1 x USB Receiver
• User Guide
Installing the Batteries
USB receiver
Battery compartment
cover
On/Off switch
Reset button
1. Remove the battery cover from the back of the keypad.
2. Insert the supplied battery, making sure that the positive (+) and
negative (-) ends of each battery match the polarity indicators inside
the battery compartment.
3. Slide the battery cover back into position until it “clicks” firmly into place.
Targus Wireless Numeric Keypad
4
Targus Wireless Numeric Keypad
5
This keypad is a plug and play device. It should automatically operate
when the USB receiver is connected to the computer.
Connecting to Your Computer
1. Remove the USB receiver from the back of the keypad.
2. Plug the USB receiver into an available USB port on your computer.
3. Power on the keypad by using the On/Off switch located on the back of
the keypad.
NOTE: WHEN THERE IS COMMUNICATION BETWEEN THE KEYPAD AND THE RECEIVER, THE
LED ON THE RECEIVER WILL FLASH.
• To extend the life of your battery, turn off the keypad while travelling or
when you’re not using it.
Power Management
If the response time of the keypad is slow or it intermittently stops working:
Re-Establishing a New Connection
1. Unplug the USB receiver from the computer.
2. Plug the USB receiver into another available USB port and the LED
indicator will flash for 1 minute to indicate pairing mode is activated.
3. Power on the keypad and press the reset button to re-establish a new
connection.
Battery Life Indicator
The light will turn on when the power is low and batteries need to be
replaced.

Produktspecifikationer

Varumärke: Targus
Kategori: Tangentbord
Modell: AKP11US

Behöver du hjälp?

Om du behöver hjälp med Targus AKP11US ställ en fråga nedan och andra användare kommer att svara dig