Tascam IF-FW/DM Bruksanvisning

Tascam Inte kategoriserad IF-FW/DM

Läs nedan 📖 manual på svenska för Tascam IF-FW/DM (12 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/12

»D00830000B

OWNER'S MANUAL

IF-FW/DM

FireWire Interface Card

2 TASCAM IF-FW/DM Owner's Manual

SETUP ........................................7

IF-FW/DM Interface Setup ...............7

CUBASE / NUENDO .....................7

SONAR ..........................................7

LOGIC ...........................................7

DIGITAL PERFORMER .................7

SYSTEM CLOCKING ........................8

MASTER CLOCK ..........................8

CLOCK SETTINGS .......................8

96 k & 88.2 k Operation ............8

IF-FW/DM & MIXER ROUTING ........8

MIXER OUTPUTS .........................8

DM-3200 ...................................8

DM-24 .......................................9

MIXER INPUTS .............................9

DM-3200 ...................................9

DM-24 .......................................9

THE IF-FW/DM CONTROL PANEL

(WINDOWS) ................................10

ENABLE WDM ............................11

Table of contents

INTRODUCTION .......................2

FEATURES ........................................3

SYSTEM REQUIREMENTS ..............3

Macintosh .....................................3

Windows .......................................3

DM-3200 Requirements ...............3

DM-24 Requirements ...................3

Trademarks ...................................3

INSTALLATION ..........................4

CONFIGURE FOR YOUR MIXER .....4

INSTALLING THE IF-FW/DM ............4

MAKING CONNECTIONS .................5

CONFIGURING THE COMPUTER ....5

Macintosh .....................................5

Windows .......................................6

Windows 64-Bit ............................6

Thank you for purchasing the TASCAM

I F- F W / DM Fir e Wi re a ud i o ca r d fo r

TASCAM mixers. It is designed to provide

audio and MIDI interfacing between your

TASCAM mixer and your computer based

DAW, essentially turning your TASCAM

mixer into a FireWire audio/MIDI interface.

Please take some time to look through this

Owner’s Manual and familiarize yourself

with the IF-FW/DM’s features, setup and

operation. We suggest you pay particular

attention to the setup notes for your com-

puter platform of choice (Mac or PC). You

may also need to refer to your software’s

documentation for a clear understanding of

how to set up an audio/MIDI interface from

within your software. Your experience with

the IF-FW/DM will be greatly enhanced by a

good working knowledge of your audio soft-

ware.

Be sure to check the TASCAM web site at

www.tascam.com to ensure you have the

latest software updates for your IF-FW/DM.

Introduction

TASCAM IF-FW/DM Owner's Manual 3

Introduction

The IF-FW/DM provides the following inter-

facing between your TASCAM mixer and a

host computer via FireWire:

• 24 channels of Input to the mixer from the

computer at 44.1k and 48k sample rates

• 24 channels of Output from the mixer to

the computer at 44.1k and 48k sample

rates

• 1 MIDI port In and Out from the com-

puter

Features

Macintosh

• OS: MacOS X 10.3.5 or higher

• Computer: Apple Macintosh series with

on-board FireWire

• Minimum: G4/800 MHz

• Recommended: Dual G4/1 GHz or higher

• Memory (RAM): 256MB or more

Windows

• OS: Microsoft® Windows® XP Home

Edition or XP Professional with Service

Pack 2

• Computer: Windows® XP Compatible

PC equipped with an IEEE 1394/FireWire

Port

• Minimum: Pentium®, Celeron®, or

Pentium® compatible processor 1.5 GHz

or higher

• Recommended: Pentium® IV/2 GHz or

higher

• Memory (RAM): 256MB or more

DM-3200 Requirements

The DM-3200 must be running software

V1.20 or higher to use the IF-FW/DM.

Please refer to www.tascam.com to obtain

this update. Do not proceed to install the

IF-FW/DM until your DM-3200 is running

V1.20 or higher.

DM-24 Requirements

The DM-24 must be running V3.00 software

to use the IF-FW/DM. Please refer to www.

tascam.com or your local service center to

obtain this update. Do not proceed to install

the IF-FW/DM until your DM-24 is running

V3.00 or higher.

System Requirements

Windows and Windows XP are trademarks

of Microsoft Corporation.

Macintosh, MacOS, MacOS X and FireWire

™ are trademarks of Apple Computer.

All other trademarks are the property of their

respective holders.

Trademarks

Produktspecifikationer

Varumärke:	Tascam
Kategori:	Inte kategoriserad
Modell:	IF-FW/DM
Typ av operation:	Knoppen
Färg på produkten:	Green, White
Vikt:	81 g
Bredd:	106 mm
Djup:	139 mm
Höjd:	29 mm
Snäll:	Basisrekenmachine
Användarmanual:	Ja
Kraftkälla:	Batterij/Zonne-energie
Automatisk avstängning:	Ja
Vormfaktor:	Desktop
Andra LCD-skärmen:	Nee
Omslag:	Nee
Tal:	10 cijfers
Skärmens lutning:	Nee
Textregler:	1 regels
Handledsstöd:	Nee
Bakgrundsbelyst display:	Nee