Tascam US-144MKII Bruksanvisning
Tascam
Gränssnittshubb
US-144MKII
Läs gratis den bruksanvisning för Tascam US-144MKII (36 sidor) i kategorin Gränssnittshubb. Guiden har ansetts hjälpsam av 35 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 18 recensioner. Har du en fråga om Tascam US-144MKII eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/36
US-144@#
USB 2.0 Audio/MIDI Interface
D01087720A
OWNER'S MANUAL
2 TASCAM US-144MKII
IMPORTANT SAFETY PRECAUTIONS
TO THE USER
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reason-
able protection against harmful interference
in a residential installation. This equipment
generates, uses, and can radiate radio fre-
quency energy and, if not installed and used
in accordance with the instruction manual,
may cause harmful interference to radio com-
munications.
However, there is no guarantee that interfer-
ence will not occur in a particular installation.
If this equipment does cause harmful interfer-
ence to radio or television reception, which
can be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures.
a) Reorient or relocate the receiving anten-
na.
b) Incr ea se t he separa ti on be t ween the
equipment and receiver.
c) Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
d) Consult the dealer or an experienced
radio/T V technician for help.
CAUTION
Chan ge s or modi f icat ions to this e q uip-
me nt no t ex pre s sl y ap pr ove d b y T E AC
CORPORATION for compliance could void
the user's authorit y to operate this equip-
ment.
For U.S.A. Declaration of Conformity
Model Number: US-144MKII
Trade Name: TASCAM
Responsible party: TEAC AMERICA, INC.
Montebello, California, U.S.A.
Telephone number: 1-323-726-0303
This device complies with Part 15 of th e FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that cause undesired operation.
This appliance has a serial number located on the bot-
tom panel. Please record the model number and serial
number and retain them for your records.
Model number
Serial number
TASCAM US-144MKII 3
IMPORTANT SAFETY PRECAUTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block a ny ventilat ion openings .
Inst all in accorda nce with t he manuf ac-
turer's instructions.
8 Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that pro-
duce heat.
9 - Only use attachments/accessories speci
fied by the manufacturer.
Use only with the cart, stand, tripod, brack-10
et, or table specified by the manufacturer,
or sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
• Do not expose this appa ratus to drips or
splashes.
• Do not place any objects filled with liquids,
such as vases, on the apparatus.
• Do not install this apparatus in a confined
space such as a book case or similar unit.
Produktspecifikationer
| Varumärke: | Tascam |
| Kategori: | Gränssnittshubb |
| Modell: | US-144MKII |
Behöver du hjälp?
Om du behöver hjälp med Tascam US-144MKII ställ en fråga nedan och andra användare kommer att svara dig
Gränssnittshubb Tascam Manualer
19 September 2024
4 September 2024
28 Augusti 2024
24 Augusti 2024
14 Augusti 2024
14 Augusti 2024
3 Augusti 2024
1 Augusti 2024
28 Juli 2024
Gränssnittshubb Manualer
- Aluratek
- Steren
- TP Link
- SIIG
- Edimax
- Monacor
- Antelope Audio
- Netgear
- Manhattan
- Axagon
- StarTech.com
- Hama
- SmartAVI
- Trekstor
- Tripp Lite
Nyaste Gränssnittshubb Manualer
15 Augusti 2025
15 Augusti 2025
15 Augusti 2025
14 Augusti 2025
14 Augusti 2025
10 Augusti 2025
23 Juli 2025
23 Juli 2025
30 December 2025
29 December 2024