Taylor 162 Bruksanvisning

Läs gratis den bruksanvisning för Taylor 162 (2 sidor) i kategorin Termometer. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 8 recensioner. Har du en fråga om Taylor 162 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
18” DIAL SERIES
©2018 Taylor Precision Products
Oak Brook, IL 60523
ALL 18 Metal Dials_5.25.18
COMPLETE ONE YEAR LIMITED WARRANTY
Made in Mexico
MOUNTING INSTRUCTIONS:
1. Two screws or nails (not included) are required
for mounting.
2. Place first screw approximately 1" below the point
at which you wish the top of the dial, leaving
screw head out 3/16".
3. Place dial over the screw to engage large part of
keyhole and slip down.
4. Bend bottom hanger down to expose hole and use
screw to secure in position.
Do not mount in direct sunlight, near a heat source, or
near a large body of water as these situations could
affect the proper air temperature reading.
Mount securely and protected from the wind to prevent
against any damage from being knocked off the mount-
ing screw and falling to the ground.
Ultraviolet light from sunlight can prematurely
weather the product.
EXPOSURE:
THERMOMETER INSTRUMENT INSTRUCTIONS:
1. Mount instrument in a place where it will not
receive direct heat from the sun or reflected from
another surface.
2. If mounted on a wall, it should not be a heated wall
or over a window or opening which leads from heated
structure.
3. When mounted correctly the instrument should
indicate the ambient air temperature to plus or
minus 2°F.
4. Temperature is affected by many factors; cloudy
days, day or night and your thermometer will only
measure the temperature at the place where it is
mounted.
INDOOR/OUTDOOR
18" DIAL Weather resistant metal construction
Easy-to-read graphics
18" DIAL
18" DIAL
CLOCK DIAL SET-UP INSTRUCTIONS:
1. Start clock by installing 1 AA battery (not
included).
2. To time set , turn the the small knob above the
battery compartment to set the clock hands to the
correct time.

Produktspecifikationer

Varumärke: Taylor
Kategori: Termometer
Modell: 162
Färg på produkten: Zwart
Vikt: 2190 g
Bredd: 150 mm
Djup: 142 mm
Höjd: 86 mm
Ljudnivå: - dB
Förpackningens vikt: 2470 g
Förpackningens bredd: 115 mm
Djuppackning: 270 mm
Förpackningshöjd: 186 mm
Typ av förpackning: Doos
Nuvarande: 8 A
Medföljande kablar: SATA
Certifiering: CE / TÜV
Avsedd för: Pc/server
Strömspänningsskydd: Over current, Over power, Over voltage, Short circuit, Under voltage
80 PLUS certifiering: 80 PLUS Gold
Totala tillgångar: 550 W
Typ av kylning: Actief
AC-ingångsspänning: 110 - 240 V
AC-ingångsfrekvens: 47 - 60 Hz
Harmoniserad systemkod (HS): 84733020
Ventilator diameter: 120 mm
Moderkorts strömkontakt: 24-pin ATX
Perifera (Molex) strömkontakter (4-stift): 5
Strömförsörjningsformfaktor (PSU): ATX
Power Factor Correction (PFC) typ: Actief
Kombinerad effekt (+12V): 100 W
Kombinerad effekt (+5V): 100 W
Max aktuell utgång (+3,3V): 20 A
Max strömutgång (+12V): 45 A
Max aktuell utgång (+5V): 20 A
Max strömutgång (-12V): 0.3 A
Max strömutgång (+5Vsb): 2.5 A
Kombinerad effekt (-12V): 3.6 W
Kombinerad effekt (+5Vsb): 12.5 W
Antal SATA-strömkontakter: 8
Kabeltyp: Volledig modulair
ATX version: 2.31
PCI Express-strömkontakter (6+2-stift): 4
CPU-strömkontakt (4+4-stift): Ja
Antal PATA-strömkontakter: 5
SATA-strömkabelns längd: 950 mm
Längd på moderkortets strömkabel: 650 mm
PCI Express strömkabellängd: 750 mm
CPU-strömkabelns längd: 650 mm
Längd perifer strömkabel (Molex): 500,800 mm
EPS-strömkontakt (4+4-stift): Ja

Behöver du hjälp?

Om du behöver hjälp med Taylor 162 ställ en fråga nedan och andra användare kommer att svara dig