Taylor 92331T Bruksanvisning

Taylor klocka 92331T

Läs gratis den bruksanvisning för Taylor 92331T (2 sidor) i kategorin klocka. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 10 recensioner. Har du en fråga om Taylor 92331T eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

QUICK USE GUIDE

MOUNTING INSTRUCTIONS

1. Select a location on a wall that is out of direct sunlight.

2. Two screws or nails (not included) are required for

mounting. Place the first screw approximately 2 ¾”

below the point where the top of the thermometer will be

positioned, leaving screw or nail head out approximately

¼”. Place the second screw or nail 8” below the first.

3. Place the thermometer over the screws or nails heads.

CLOCK OPERATING INSTRUCTIONS

1. Insert 1 AA battery (not included) according to polarity

markings inside the battery compartment.

2. Set correct time by rotating the adjustment knob on the

back of the clock movement.

Congratulations on purchasing your decorative indoor and outdoor polyresin clock and/or

thermometer by Taylor. This line of product is hand painted and sculpted of durable polyresin

material that is weather resistant. Includes thermometer coils that are precision made and

Quartz clock movement for the utmost accuracy. Please read instructions below thoroughly to

ensure that you have the full benefit of all the unit’s features. Keep these instructions handy for

future reference.

TO RECALIBRATE THE THERMOMETER

Your thermometer will be accurate from the factory, however

rough shipping and handling could disrupt the accuracy. Here

are some quick tips on how to recalibrate your thermometer.

1. Place the thermometer in a room with a known

temperature and allow the thermometer pointer to settle

for at least 10 minutes.

2. Spin the dial on the back of the thermometer to match

the current temperature of the room.

EXPOSURE

1. Do not mount in direct sunlight, near a heat source, or near a large body of water as these

situations could affect the proper air temperature reading. Ultraviolet light from sunlight

can prematurely weather the product.

2. Mount securely and protected from the wind to prevent against any damage from being

knocked off the mounting screw and falling to the ground.

Thermometer coil

Battery Compartment

Mounting

Support

Produktspecifikationer

Varumärke:	Taylor
Kategori:	klocka
Modell:	92331T
Färg på produkten:	Zwart
Vikt:	200 g
Bredd:	94 mm
Djup:	70 mm
Höjd:	26 mm
Nuvarande:	2 A
Anslutningsteknik:	Bedraad
Antal Ethernet LAN (RJ-45)-portar:	1
Certifiering:	FCC Class A, CE Class A
Inspänning:	5 V
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Nätverksstandard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Förvaringstemperatur:	-10 - 70 °C
Internera:	Nee
Våglängd:	1550 nm
Förvaringsfuktighet:	5 - 95 procent
Ethernet-gränssnittstyp:	Gigabit Ethernet
Maximal dataöverföringshastighet:	2000 Mbit/s
Auto MDI/MDI-X:	Ja
Stöd för Jumbo Frames:	Ja
Koppar Ethernet-kabelteknik:	10BASE-T, 100BASE-T, 1000BASE-LX, 1000BASE-T
Maximal-räckvidd:	60000 m
Drifttemperatur (TT):	0 - 50 °C
Relativ luftfuktighet i drift (VV):	5 - 95 procent
Harmoniserad systemkod (HS):	85176990
Jumbo ramar:	9000
Lagra och vidarebefordra:	Ja
Fiberoptisk kontakt:	SC
Omvandlarens ingångsgränssnitt:	1000Base-T
Duplexsystem:	Full, Half
Konverterns utgångsgränssnitt:	1000Base-LX
Fiberkanalportar:	1
Våglängdsmultiplexering (WDM):	Ja