TCL LINKPORT IK511 Bruksanvisning

Läs gratis den bruksanvisning för TCL LINKPORT IK511 (2 sidor) i kategorin Mobiltelefon. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 4 recensioner. Har du en fråga om TCL LINKPORT IK511 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Quick Start Guide

IK511U

CJB77W0TBAAD

TCL LINKPORT IK511USB-C to USB-C cableTerms & Condions

Quick Start GuideSafety and Warranty InformaonImportant Informaon Leaet

Geng to know your TCL LINKPORT IK511

1

System LED Indicator

1

2

3

4

5

6

2

Signal LED Indicator

3

SMS LED Indicator

4

USB-C Port

5

SIM Card Slot

6

Reset Buon

How to start your TCL LINKPORT IK511

Step 1. Insert a Nano SIM card.

1. Remove the back cover. Hold the TCL LINKPORT IK511 in one hand and pull the back cover

outwards from the slot using the index nger of your other hand.

2. Align the SIM card cutout tab as seen in the diagram and gently slide the card into the slot with

the gold metal contacts facing down.

3. Make sure the Nano SIM card clicks into place. Put the back cover on.

Step 2.Connect your TCL LINKPORT IK511 to a computer using the USB-C to USB-C cable

included in the box.

Step 3.Soware will auto-install. Once installaon is complete, your TCL LINKPORT IK511 is ready

for use.

* TCL LINKPORT IK511 supports Plug and Play for terminals with dierent operang systems in Web UI

mode. For more details, go to the Help secon on the main page of the Web UI.

Notes:

• Do not remove the Nano SIM card when the TCL LINKPORT IK511 is in use.

• If connecon fails, go to hp://192.168.0.1 to check the status.

• If you cannot access hp://192.168.0.1, disconnect from all networks, remove and re-insert the

TCL LINKPORT IK511, reset the TCL LINKPORT IK511, or restart your computer.

M2M (Machine to Machine) mode (Only for M2M users)

The M2M mode is only applicable for technology professionals. Use with cauon.

1. Log in the Web UI, go to Sengs > Advanced sengs > M2M, click M2M status to enable M2M

mode. At this me, the Web UI will be unavailable.

2. Connect your TCL LINKPORT IK511 to the terminal you want to use it in M2M mode.

* When your TCL LINKPORT IK511 is working, press the Reset buon for 3 seconds or through

AT commands

1

to reset your TCL LINKPORT IK511 back to the Web UI.

¹ AT commands (AT meaning aenon) are instrucons used to control a modem. The command set consists

of a series of short text strings which can be combined to produce commands for operaons such as

dialing, managing SMS funcons, and changing the parameters of the connecon.

LED Indicator

Indicator descriponLED indicator status

Powering upSystem LED Indicator: Solid yellow

Error (for example, SIM card is not

recognized, or PIN, PUK or SIM lock

protected)

System LED Indicator: Solid red

Network searchingSystem LED Indicator: Solid green

Signal LED Indicator: Blinking blue

Registered on 4G or 5G (but no EPS

bearer established)

System LED Indicator: Solid green

Signal LED Indicator:

• Solid green: Strong signal strength

• Solid yellow: Acceptable signal strength

• Solid red: No signal

Connected on 4G or 5G

*System LED Indicator: Solid green

Signal LED Indicator:

• Solid green: Strong signal strength

• Solid yellow: Acceptable signal strength

• Solid red: No signal

Firmware upgradingSystem LED Indicator: Blinking blue

Signal LED Indicator: O

SMS LED Indicator: O

Unread SMSSMS LED Indicator: Blinking green

SMS Inbox is fullSMS LED Indicator: Solid green

No unread SMS and inbox is not fullSMS LED Indicator: O

ResetWhen the Reset buon is pressed for 3 seconds, the

System & Signal & SMS LEDs will turn solid green at the

same me, and the device will be restored to factory

sengs and then restart.

* 5G requires capable device.

Quick setup

Open your browser and go to hp://192.168.0.1 to enter the main page.

Click “Sengs” to congure the basic sengs.

Approved Firmware Versions

This device will only operate with rmware versions that have been approved for use by your

wireless carrier and the device manufacturer. If unauthorized rmware is placed on the device it will

not funcon.

Informaon About Safeguarding Devices

We encourage customers to take appropriate measures to secure their devices and invite them

to take advantage of the features available on this device to help secure it from the and/or

other unauthorized access and use. This device has a locking funcon (e.g., user-dened codes

or paerns) that can serve as a rst line of defense against unauthorized use or access to stored

informaon. Preloaded security applicaons that allow customers to track or locate misplaced

devices can be found on several devices. Lost or stolen devices should be immediately reported

to your wireless carrier so that proper measures can be taken to protect accounts. For addional

informaon, visit your wireless carrier’s Privacy Policy.

Package Contents

Produktspecifikationer