Techly ICA-TB TPM-3 Bruksanvisning

Techly Byråns ICA-TB TPM-3

Läs gratis den bruksanvisning för Techly ICA-TB TPM-3 (8 sidor) i kategorin Byråns. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 14 recensioner. Har du en fråga om Techly ICA-TB TPM-3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
ASSEMBLY INSTRUCTIONS
Mobile Stand
Up Workstation
min810mm-max1250mm
HOW TO ADJUST HEIGHT
Worktable can be adjusted to the
desired height by pulling up, until you
hear sound "KA" from both legs of
worktable. Then the worktable is fixed
on this height.
HOW TO LOWER HEIGHT
Pull up worktable direc tly to the top, until
you see mark "down" on the leg of
worktable, then lower it slowly to the
most bottom, until you hear sound "KA"
from both legs of worktable. Then pull up
to the right height.
NOTE:
1.Loosen the knobs to adjust the
worktable to the desired height , then
tighten the k nobs to secure.
2.Please do not put anything on the
worktable when adjusting the worktable
height.
3.Make sure both legs of worktable are
at same height while finis hed height
adjus tment.
4.Make sure you hear sound "KA" while
you adjust worktable to your desired
height. This means the worktable is
fixed at the height; If without this sound,
it means the worktable is not fixed at this
height.
5."MAX" mark on the leg means the max
height whic h worktable can be fixed.


Produktspecifikationer

Varumärke: Techly
Kategori: Byråns
Modell: ICA-TB TPM-3

Behöver du hjälp?

Om du behöver hjälp med Techly ICA-TB TPM-3 ställ en fråga nedan och andra användare kommer att svara dig