Techly IDATA HDMI-CAPCA01 Bruksanvisning

Läs gratis den bruksanvisning för Techly IDATA HDMI-CAPCA01 (2 sidor) i kategorin Audio/video-omvandlare. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 5 recensioner. Har du en fråga om Techly IDATA HDMI-CAPCA01 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

QUICK START GUIDE

HDMI Grabber type:

1. Standalone Mode (PC free)

Storage: USB HDD/USB Flash Drive

2. Dual Mode (Standalone Mode + PC Mode)

Storage: USB HDD / USB Flash Drive, SD Card or PC HDD

SAFETY PRECAUTION

Before using the HDMI Grabber please ensure that you read and

understand the safety precautions below.

•DonotattempttoopenthecaseoftheHDMIGrabberor

modifyitinanyway,asthisvoidthewarranty.

•KeeptheHDMIGrabberawayfromheatsource,sunlight,

humidplaceandliquids.

•TheHDMIGrabbermaybecomewarmduringusage.This

doesnotindicatemalfunction.

•DonotplaceheavyobjectsontheHDMIGrabber,asthismay

causethedevicetooverheatandmalfunction.

•IftheexterioroftheHDMIGrabberrequirescleaning,wipeit

with a soft dry cloth.

RECORDING STEPS

1.Switchonpower,LEDwillflashquicklyinblueandgreen.

2. Connect video source to HDMI Grabber. LED will turn blue

(1080i/p) or green (720p).

3. Connect a USB storage device to the USB port of HDMI

Grabber.

4.PressREC/STOPbuttontostartrecording,theLEDwillflash

slowly.

5.PressREC/STOPbuttonagaintostoprecording.

6.TheLEDwillflashinblue/greenslowly.DONOTremovethe

USBdeviceasthefileisbeingsaved.TheLEDgoesoffwhen

the file is saved.

PRODUCT CONNECTORS/ BUTTONS / LED LIGHTS

N. STANDALONE DUAL MODE

1

PowerPower

2

DC Input 5 V / 2ADC Input 5 V / 2A

3

HDMIINHDMIIN

4

HDMIOUTHDMIOUT

5

MIC inputMIC input

6

USB2.0 USB2.0

7

Micro USB (USB to PC)

8

Record/Stop buttonRecord/Stop button

CONNECTION - STANDALONE MODE

PlayStation3andPlayStation4XBOX360andXBOXONE

**ExternalpowermayberequiredfromsomeUSBHDD

1.MakesurethePS3/4video/audiooutputaresetupcorrectly

before you begin.

2. Connect Ps (output) to HDMI Grabber (input) via HDMI cable.

3.ConnectHDMIGrabbertoTVviaHDMIcable.

4.MakesuregameplayisvisibleonTVscreen(ifTVscreenois

black,trytopressandholdREC/STOPbuttonfor10seconds).

5. Connect USB HDD/USB Flash Drive to HDMI Grabber.

RECORDING FILE & TIME

File saving

- HDMI Grabber will record a new file when the previous

recordingfilereachesthemaximum2GBcapacity.

- When HDD or USB storage is full, HDMI Grabber stops

recording and record light will go off.

-HDMIGrabbersavesfilesinMPEG4format.

Resolution

Theresolutioncanbesetateither720por1080pforcapture.

Pleasenotethatnotallgames/videofilesareproducedat1080p.

Recording time

TheHDMIGrabberwillrecordapproximately1GBper10minsat

either 720p or 1080p.

PS3 PS4

HDMI In

HDMI Out

HDMI Grabber

USB Flash Drive

USB HDD

*

TV

13

456

2

8

7

WWW.TECHLY.COM

EN - 1

HD VIDEO

CAPTURE BOX

Produktspecifikationer