Techno Line WS 6840 Bruksanvisning

Läs gratis den bruksanvisning för Techno Line WS 6840 (2 sidor) i kategorin Väderstation. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 9 recensioner. Har du en fråga om Techno Line WS 6840 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

LED Radio-Controlled Clock WS 6840

Key Features:

`DCF-77 radio controlled

` 12/24 H display.

` Time zone setting: -12 to +12 Hour.

` Dual Alarm with snooze function

` Indoor Temperature display in °C/°F

` Outdoor Temperature display in °C/°F

Power on or Reset:

`After power on or Reset, all LEDs turn on accordingly, buzzer beeps, unit enter RF Searching mode for Max. 3

minutes, then exit RF Searching mode and enter normal mode.

Clock setting:

`At normal mode, Press and hold the “MODE” key more than 2 seconds, can set 12/24HR Æ ÆÆHour Minute

Offset time.

` Corresponding icon flash at 1Hz, and press “UP” or “DOWN” ”key to set the value, and hold “UP” or “DOWN key for

fast increasing or decreasing.

`Press “MODE” key to confirm the setting and come to next setting, unit will return to Normal Mode after finish

setting.

F.Y.I.:

`At any other mode, if without key operation for 15 seconds, the unit will store current setting and return to Normal

Mode automatically.

` How to set Offset Time : Offset time means the time different between local time and Germany time; If local time is

1 hour faster than Germany time, then set the offset time to +1HR; If local time is 1 hour slower than Germany time,

then set the offset time to -1HR; Unit’s clock will automatically set to local time after receiving DCF signal

successfully.

Alarm Setting:

` At normal mode, Press “Mode” key to toggle the display among Clock Æ AL1 time Æ AL2 time, When AL1 or AL2

time be displayed ,press and hold “Mode” key more than 2 seconds to set Hour & Minute, corresponding icon

flash at 1Hz. press “UP” or “DOWN” key to set the value, and hold “UP” or “DOWN”key for fast increasing or

decreasing.

`When AL1 or AL2 icon flash, Press “Down” keyto enable(Corresponding Alarm LED turn on) or

disable(Corresponding Alarm LED turn off) alarm. Unit will return to normal mode after finish setting

`Alarm sound crescendo for 2 minutes.

` During alarm, press “SNOOZE” key to stop the alarm and enable snooze function (Corresponding Alarm LED flash

at this status), the unit will alarm 5 minutes later.

`During alarm or Snooze function enable, press any other keys except “SNOOZE” key, will cancel the alarm or

Snooze function.

Indoor Temperature Measurement:

`Indoor Temperature measurement range: -9°C ~ +49°C, “LLL” will displayed if value lower than -9°C, “HHH” will

Produktspecifikationer