Techno Line WT 495 Bruksanvisning


Läs gratis den bruksanvisning för Techno Line WT 495 (3 sidor) i kategorin Larmet ringer. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 14 recensioner. Har du en fråga om Techno Line WT 495 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
WT 495 - LED Quartz alarm clock
Instructions manual
INSTALLATION
Plug in the AC/DC adaptor to any AC household outlet. Then plug in the DC jack to the back of
your unit.
Peel off the protective label on the front of your LED clock, the clock will display 0:00 and it is ready
to work for you.
BACK-UP BATTERY
1. Slide open the battery cover at the back of your clock.
2. Insert 1 x CR2032 lithium battery into the battery compartment with the + ve polarity facing up.
3. Replace the battery cover.
When AC power is off, the batteries will back the clock to keep track of time and the alarm time.
The LED display is off when only the back-up battery is being used.


Produktspecifikationer

Varumärke: Techno Line
Kategori: Larmet ringer
Modell: WT 495

Behöver du hjälp?

Om du behöver hjälp med Techno Line WT 495 ställ en fråga nedan och andra användare kommer att svara dig