Tel Sell Climb Trek Bruksanvisning

Tel Sell Motionscykel Climb Trek

Läs gratis den bruksanvisning för Tel Sell Climb Trek (5 sidor) i kategorin Motionscykel. Guiden har ansetts hjälpsam av 30 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 15.5 recensioner. Har du en fråga om Tel Sell Climb Trek eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/5

Mi Air Humidier

01 Overview

Lid

Lid handle

Hole for steam outlet

Water tank Water level indicator

Safety cover of built-in

antibacterial UV lamp

Ball, indicating water

level

Plate, spraying

a steam

Air outlet hole

Bactericidal UV lamp

The unit base

(base)

Power button / switch

modes

Mode indicator

Water volume indicator/

Status of the device

Adaptor

АС power cable

02 Setting

Installing the main unit

Three parts of the humidier

(lid handle, cover and base unit

(base)) collected, when marks,

shown in the rear of the device

are aligned.

Wi-Fi indicator

Light adjusting button

Air input hole

DC power cable

03 Usage

Proper device positioning

Place the humidier on exposed

surfaces. The humidier should

be located away from walls,

furniture, appliances, etc., things

would not accumulate

moisture.

Adding a water

Open the lid and pour a water into the tank.

Please do not spill water, and do not pour too

much water (water should not exceed the MAX

mark).

The water used: household water, mineral water,

puried water. Do not use distilled water.

maximum water

level

04 Usage

Connecting power adapter

It is necessary to distinguish between DC power

cable and AC cable. By connecting the DC cable

to AC adapter, be guided by side with the image

of the negative pole.

Cnnecting АС cable

Connect AC cable to power

supply.

Light management

To operate a light you need

to press the button on a

rear side of the humidier.

Each press of the button

allows you to control light

switch lighting modes:

continuous light, ashing

light, turn o the light.

Connecting to mobile App

To install «Mi Home» app, scan

the QR-Code. Open the app, click

on icon «My Device» and add «Mi

Air Humidier» to your list. After

successfully adding a humidier,

you will nd it in «Smart Devices»

list.

This device is already in a list of Mi Smart Home devices, supports MIUI system and can

interface and interact with other Mi Smart Home devices.

To nd out more information about operation of this device or to purchase other smart

devices, register in Mi Smart Home APP.

05 Usage

On-O/ mode switching

- Turning on

Press the button to turn humidier on.

Mi Air Humidier remembers a mode, established

after last use of the device. When rst using the

device, a default is 1st mode.

Note: If no water in the tank, the humidier does not

turn on. Please add water rst, and then use the

device.

- Mode switching

Click on the button to switch a mode.

Each time you press the button you switch 1st, 2nd,

3rd mode.

- Shutdown

Press and hold the button for 3 seconds to turn o

the device.

Note: If the humidier is over water, it is

automatically switched o.

- Maximum mode

IWhen the device is o, press and hold the button for 5 seconds to activate maximum

mode. The humidier can work 4.5 hours by default. If water is over the device, it switches

o automatically. Click on the button to turn on 1st mode.

Mode O mode 1 mode 2 mode 3 mode Low

energy

Indicators

Indicators status

Indicators lit Indicator o Indicators ashing

Volume of water / LED status of the device

Mode O mode Work mode Low

water

level

Water is over

Indicators

Indicators lit Indicators o Indicators ashing

06 Maintenance

Draining

After using the device in a timely manner, drain a water from the tank and the base of the

humidier to prevent increase and spread of a possible bacteria, micro-organisms and to

prevent air pollution.

Disconnect the device from a power supply, then water can be drained.

Drain water from the tank

Click and hold on the valve, which is located under the tank to drain remaining water.

Drain water from the base of the humidier

It is strongly recommended to drain water from the device in a place where there is a

corresponding image and inscription, to prevent water from entering the air outlet hole and

to avoid damage to the device.

07 Maintenance

Reset Wi-Fi

If the humidier is not connected to your phone,

press and hold the Power button and Light control

Button for 5 seconds until you hear a beep, indicating

of successful reset Wi-Fi settings.

Power button

Light operating button

Cleaning the humidier

To clean the humidier base and tank, you can use

pure water or neutral detergent, followed by a wipe

with a dry cloth. Do not use a hair dryer or other

heating devices to dry the humidier. Avoid direct

sunlight.

In the case of regular use of a humidier is recommended to clean it once a week.

Presence of toxic and hazardous substances

Main characteristics

Warranty time

Note: The warranty applies only to companies in China.

Produktspecifikationer

Varumärke:	Tel Sell
Kategori:	Motionscykel
Modell:	Climb Trek
Färg på produkten:	Meerkleurig
Bredd:	148 mm
Snäll:	Vliegtuigmodel
Rekommenderad ålder (min):	10 jaar
Material:	Kunststof
Avsedd för:	Militair vliegtuig
Konstruktionstyp:	Montagekit
Antal bitar:	63 stuk(s)
Tema:	Tweede Wereldoorlog
Typ produkt:	Modelvliegtuig met vaste vleugels
Ej för barn 0-3 år:	Ja
Maträtt:	1:72
Original modellnamn:	Vought F4U-1D CORSAIR
Vingspann:	173 mm
Rekommenderad färdighetsnivå:	Tussenliggend
Rörliga delar:	Ja