Texas Instruments MSP430BT5190 Bruksanvisning

Läs gratis den bruksanvisning för Texas Instruments MSP430BT5190 (112 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 10 personer. Har du en fråga om Texas Instruments MSP430BT5190 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

MSP430BT5190 Mixed-Signal Microcontroller

1 Features

•Designed for use with CC2560 TI Bluetooth

®

based solutions

•Commercially licensed Mindtree

™

Ethermind

Bluetooth Stack for MSP430

–Bluetooth v2.1 + enhanced data rate (EDR)

compliant

–Serial port profile (SPP)

–Sample applications

•Low supply voltage range:

3.6 V down to 1.8 V

•Ultra-low power consumption

–Active mode (AM):

all system clocks active

230 µA/MHz at 8 MHz, 3 V, flash program

execution (typical)

110 µA/MHz at 8 MHz, 3 V, RAM program

execution (typical)

–Standby mode (LPM3):

real-time clock (RTC) with crystal, watchdog,

and supply supervisor operational, full RAM

retention, fast wakeup:

1.7 µA at 2.2 V, 2.1 µA at 3 V (typical)

low-power oscillator (VLO), general-purpose

counter, watchdog, and supply supervisor

operational, full RAM retention, fast wakeup:

1.2 µA at 3 V (typical)

–Off mode (LPM4):

full RAM retention, supply supervisor

operational, fast wakeup:

1.2 µA at 3 V (typical)

–Shutdown mode (LPM4.5):

0.1 µA at 3 V (typical)

•Wake up from standby mode in less than 5 µs

•16-bit RISC architecture

•Flexible power-management system

–Fully integrated LDO with programmable

regulated core supply voltage

–Supply voltage supervision, monitoring, and

brownout

•Unified clock system

–FLL control loop for frequency stabilization

–Low-power low-frequency internal clock source

(VLO)

–Low-frequency trimmed internal reference

source (REFO)

–32-kHz crystals

–High-frequency crystals up to 32 MHz

•16-bit timer TA0, Timer_A with five capture/

compare registers

•16-bit timer TA1, Timer_A with three capture/

compare registers

•16-bit timer TB0, Timer_B with seven capture/

compare shadow registers

•Up to four universal serial communication

interfaces (USCIs)

–USCI_A0, USCI_A1, USCI_A2, and USCI_A3

each support:

•Enhanced UART supports automatic baud-

rate detection

•IrDA encoder and decoder

•Synchronous SPI

–USCI_B0, USCI_B1, USCI_B2, and USCI_B3

each support:

•I

2

C

•Synchronous SPI

•12-bit analog-to-digital converter (ADC)

–Internal reference

–14 external channels, 2 internal channels

•Hardware multiplier supports 32-bit operations

•Serial onboard programming, no external

programming voltage needed

•3-channel internal DMA

•Basic timer with RTC feature

2 Applications

•Remote Controls

•Thermostats

•Smart Meters

•Blood Glucose Meters

•Pulseoximeters

3 Description

The TI MSP430

™

family of ultra-low-power microcontrollers consists of several devices featuring different sets of

peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is

optimized to achieve extended battery life in portable measurement applications. The device features a powerful

16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The

www.ti.com

MSP430BT5190

SLAS703C – APRIL 2010 – REVISED SEPTEMBER 2020

Copyright ©2020 Texas Instruments Incorporated

Submit Document Feedback

1

Product Folder Links: MSP430BT5190

MSP430BT5190

SLAS703C – APRIL 2010 – REVISED SEPTEMBER 2020

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.

Produktspecifikationer