Thermarest Instant Field Repair Kit Bruksanvisning
Thermarest
Inte kategoriserad
Instant Field Repair Kit
Läs gratis den bruksanvisning för Thermarest Instant Field Repair Kit (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 39 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 20 recensioner. Har du en fråga om Thermarest Instant Field Repair Kit eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
INSTANT IELD EPAIR ITF R K
Instructions | Mode d'emploi | 取扱説明書
www.thermarest.com
©2016 Cascade Designs, Inc.
4000 First Avenue South, Seattle, WA 98134 U.S.A
1-206-505-9500 | 1-800-531-9531
Made in Seattle, U.S.A. | Printed on recycled paper | P.N. 33-698-2
INSTRUCTIONS FOR MATTRESS REPAIR
Read through all instructions completely before attempting a repair.
For video repair kit instructions and complete warranty and authorized repair
center information, go to: thermarest.com/ServiceCenter
Note: This repair kit will not work on mattresses with knit fabrics. This includes
all LuxuryMAP
™
, Luxury and CampRest LE mattresses.
What You Will Need to Repair Your Therm-a-Rest
®
Mattress
Repair Kit
A way to mark the leak (marker, pen or tape)
Scissors or other cutting tool
PREPARING YOUR MATTRESS FOR REPAIR:
Locate the Leak
1. If the hole is not obvious, inflate your mattress as firmly as possible
by mouth.
2. Fold mattress in half to increase pressure.
3. Dunk mattress in water or rub soapy water on the surface.
4. Look for small escaping bubbles indicating the leak, and mark the location
with a marker, etc.
5. Open mattress valve to deflate.
6. Rinse any soapy residue and allow mattress to dry thoroughly
before proceeding.
Prepare the Surface
1. Rub the surface vigorously with an alcohol swaB to remove any dirt and/or
oils for the best possible adhesion.
2. Mattress must be completely dry before you proceed further.
REPAIRING YOUR MATTRESS:
Apply the Glue Dot
1. Cut out a single Glue Dot leaving both protective layers attached.
2. Remove the printed protective layer to expose Glue Dot. Do not remove
opposite protective layer.
3. Apply the Glue Dot to damaged area and press hard on the Glue Dot
through remaining protective layer multiple times, working it into the fibers
of the fabric.
4. Remove protective backing leaving the Glue Dot attached to the mattress.
*For larger rips/cuts, you may use more than one Glue Dot to cover
damaged area.
Apply the Clear Cover Patch
1. Remove release paper from self-adhesive patch.
2. Apply over Glue Dot repair and gently press the center with your thumb.
Now use your thumbs to thoroughly press from the center outward to
push out any wrinkles until entire patch is adhered.
Produktspecifikationer
| Varumärke: | Thermarest |
| Kategori: | Inte kategoriserad |
| Modell: | Instant Field Repair Kit |
Behöver du hjälp?
Om du behöver hjälp med Thermarest Instant Field Repair Kit ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Thermarest Manualer
19 December 2024
19 December 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
Inte kategoriserad Manualer
- Konig & Meyer
- Sungale
- Fritel
- Senco
- Amana
- GoPro
- Rugged Geek
- Focus Electrics
- Elbe
- Bluesound
- Rangemaster
- Extron
- Telestar
- X Rocker
- SmallRig
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025