Tiptop Audio Mantis Bruksanvisning
Tiptop Audio
Synthesizers
Mantis
Läs gratis den bruksanvisning för Tiptop Audio Mantis (18 sidor) i kategorin Synthesizers. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 1.5 recensioner. Har du en fråga om Tiptop Audio Mantis eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/18
MANTIS BRACKET
TIPTOP AUDIO MANTIS BRACKET
Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your
Mantis and watch your studio setup grow..
The Dual Mantis Studio Brackets pair lets you connect two Mantis together in a robust
and elegant solution. This setup is fixed and is recommend mainly for studio use. The
brackets are cut precisely by laser from a sturdy metal and then coated twice for a nice
smooth finish that matches the Mantis light gray color. They come with sixteen screws
and special washers that help hold the screw in place during assembly and keep a tiny
gap between the brackets and the Mantis. Installation is fairly simple and takes about 30
minutes to complete.
Before we begin:
Please get a Phillips head screw driver. It is also recommended to have eight eurorack
modules available to help align the Z-Rails but this is not mandatory.
The kit contains:
2 x Brackets, left and right
2 x Adhesive foam strips
12 x Phillips pan head machine screws
12 x Nylon washers
1 x Allen Wrench 3mm
IMPORTANT SAFETY MESSAGE
Tiptop Audio has conducted testing to determine the safest and most eective methods
to install the Mantis brackets. Please read these instructions fully before beginning the
assembly process. Failure to follow these instructions closely could result in damage,
not limited to, the brackets, Mantis cases, Eurorack modules and furniture surfaces.
A second person might be needed to lift or move the Mantis cases into position.
When moving the two Mantis assembly around, hold it from the lower Mantis. Do not
hold it from the upper Mantis.
If you have any questions or need clarification on the assembly, please contact Tiptop
Audio starting the assembly process!before
Step 1:
Locate the two black foam strips, gently pull o the white back paper to expose the
adhesive, carefully align the strip to the bracket leg and apply. This stu is sticky and can
not be reapplied so make sure you get it right the first time. We recommend sticking one
end of the strip first and then slowly pressing down the strip to the other end.
1
START HERE
12
Produktspecifikationer
| Varumärke: | Tiptop Audio |
| Kategori: | Synthesizers |
| Modell: | Mantis |
Behöver du hjälp?
Om du behöver hjälp med Tiptop Audio Mantis ställ en fråga nedan och andra användare kommer att svara dig
Synthesizers Tiptop Audio Manualer
2 Augusti 2025
31 Juli 2025
Synthesizers Manualer
Nyaste Synthesizers Manualer
1 Augusti 2025
1 Augusti 2025
25 Juli 2025
22 Juli 2025
17 Juli 2025
26 Juni 2025
19 Juni 2025
10 Juni 2025
3 Juni 2025
3 Juni 2025