Toolland CG10 Bruksanvisning
Toolland
Mätutrustning
CG10
Läs gratis den bruksanvisning för Toolland CG10 (20 sidor) i kategorin Mätutrustning. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 7.5 recensioner. Har du en fråga om Toolland CG10 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/20
CG10
USER MANUAL 3
HANDLEIDING 5
MODE D'EMPLOI 7
MANUAL DEL USUARIO 9
BEDIENUNGSANLEITUNG 11
INSTRUKCJA OBSŁUGI 13
MANUAL DO UTILIZADOR 15
CG10
V. 01 02/11/2021 2 ©Velleman Group –nv
CG10
V. 01 02/11/2021 3 ©Velleman Group –nv
USER MANUAL
1. Introduction
Thank you for choosing Toolland! Please read the manual
thoroughly before bringing this device into service. If the device
was damaged in transit, do not install or use it and contact your
dealer.
2. Safety Instructions
This device can be used by children aged from 8 years and
above, and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning the use of the
device in a safe way and understand the hazards involved.
Children shall not play with the device. Cleaning and user
maintenance shall not be made by children without supervision.
3. General Guidelines
• Refer to the Velleman® Service and Quality Warranty on the
last pages of this manual.
• All modifications of the device are forbidden for safety
reasons. Damage caused by user modifications to the device
is not covered by the warranty.
• Only use the device for its intended purpose. Using the
device in an unauthorised way will void the warranty.
• Damage caused by disregard of certain guidelines in this
manual is not covered by the warranty and the dealer will
not accept responsibility for any ensuing defects or
problems.
• Nor Velleman Group nv nor its dealers can be held
responsible for any damage (extraordinary, incidental or
indirect) – of any nature (financial, physical…) arising from
the possession, use or failure of this product.
• Keep this manual for future reference.
Produktspecifikationer
| Varumärke: | Toolland |
| Kategori: | Mätutrustning |
| Modell: | CG10 |
Behöver du hjälp?
Om du behöver hjälp med Toolland CG10 ställ en fråga nedan och andra användare kommer att svara dig
Mätutrustning Toolland Manualer
31 December 2025
1 September 2024
29 Augusti 2024
27 Augusti 2024
Mätutrustning Manualer
- Aktobis
- Vimar
- Ermenrich
- ClimeMET
- Technoline
- Hanna
- Fantini Cosmi
- UHoo
- Seaward
- Kübler
- Murideo
- Kemo
- IFM
- Softing
- Milwaukee
Nyaste Mätutrustning Manualer
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025