Topeak NINJA CO2 Bruksanvisning
Topeak
Inte kategoriserad
NINJA CO2
Läs gratis den bruksanvisning för Topeak NINJA CO2 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 10.5 recensioner. Har du en fråga om Topeak NINJA CO2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
User's Guide
NINJA CO2
+
/ NINJA CO2
EN
HOW TO USE MICRO AIRBOOSTER
WARNING
• Accepts all 16g threaded CO cartridges.2
• Recommended to use Topeak 16g threaded CO cartridges.2
• Please read all instructions before first use.
• Periodically check that components are still securely
fastened to your bike.
• Compatible with Ninja Cage series.
• If using the Micro AirBooster inflator continuously, make sure to wait 20 seconds in between cartridges for the
rubber grommet inside the inflation head to return to its original position. Otherwise, a gas leak may occur and
prevent proper inflation.
• Tighten the CO
2 2 cartridge before using CO inflation function. Failure to do so will cause improper operation and
may cause injury.
• DO NOT remove CO
2 2 cartridge if it is still charged with gas. Completely discharge the CO cartridge before removal.
• When opening the CO
2 cartridge, point the inflator head away from yourself and others.
• DO NOT use Micro AirBooster Inflator if any part is cracked or broken.
• DO NOT expose the CO
2 cartridge to heat, or store at temperatures above 120˚F (49˚C), or store in enclosed vehicles.
• Make sure to wear gloves when inflating to avoid injury.
• The barrel and CO
2 cartridge may become extremely cold/ frosty when the CO gas is expelled. 2
• DO NOT try to unscrew the Micro AirBooster inflation head until it has warmed sufficiently to touch.
• Keep out of reach of children.
Presta Valve
Thread-in CO cartridge. Loosen valve core before inflation.2
1 2
Start and regulate CO flow by pushing 2
inflation head onto valve stem.
3
Install and thread-in inflation head
to Schrader valve.
Schrader Valve
Thread-in CO cartridge. Start and regulate CO flow by pushing 2 2
inflation head onto valve stem.
1 2 3
After each inflation, make sure
all CO
2
gas has been discharged
by pushing the Micro AirBooster
inflation head several times.
Micro AirBooster16g Topeak
Threaded CO 2
Cartridge x 2
CO Cartridge 2
Engagement
Inflation Head
To avoid possible personal
injury and damage to bike
and /or tool, ensure to
disengage CO inflator 2
properly after use by
unthreading inflation head
in correct direction.
NOTE
Tire Lever
NINJA CO2+ NINJA CO2
YES NO
Produktspecifikationer
| Varumärke: | Topeak |
| Kategori: | Inte kategoriserad |
| Modell: | NINJA CO2 |
Behöver du hjälp?
Om du behöver hjälp med Topeak NINJA CO2 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Topeak Manualer
2 April 2025
2 April 2025
2 April 2025
2 April 2025
30 Januari 2025
21 December 2024
18 December 2024
7 Oktober 2024
26 September 2024
26 September 2024
Inte kategoriserad Manualer
- Fantec
- Pangea Audio
- Geze
- AV:link
- EWT
- Kaiser Nienhaus
- WyreStorm
- Pentair
- Maktec
- Arovec
- PCE
- Optoma
- Aguilar
- Avaya
- Shuttle
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025