TP Link LS1210P Bruksanvisning

TP Link Inte kategoriserad LS1210P

Läs gratis den bruksanvisning för TP Link LS1210P (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 9.5 recensioner. Har du en fråga om TP Link LS1210P eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Installation Guide

Desktop PoE+ Switch

LS106P/LS110P/LS1210P

LED Explanation

Power

PoE

On: Providing PoE power

O: No powered devices or not providing PoE

power

On: Power on

O: Power o

Link/Act; Uplink (LS110P) Uplink (LS1210P)

On:

Running at 10/100 Mbps, but no activity.

Flashing:

Running at 10/100 Mbps and

transmitting or receiving data.

O:

No device is linked to the corresponding

port.

On:

Running at 10/100/1000 Mbps, but no activity.

Flashing:

Running at 10/100/1000 Mbps and

transmitting or receiving data.

O:

No device is linked to the corresponding

port.

Switches Explanation

Isolation

O: Ports can transmit data with each other.

On: The corresponding ports cannot transmit data with other downlink ports. They can

transmit data only with the uplink port.

Extend

O: The corresponding ports run at 10/100 Mbps and support PoE power supply up to

100 m away.

On: The corresponding ports run at 10 Mbps and support PoE power supply up to 250 m

away.

Recovery

O: The PoE Auto Recovery function is disabled.

On: The switch will constantly detect the working status of a PoE powered device (PD).

When the switch nds that the PD works abnormally, the switch will reboot it.

Note: The numbers in brackets indicate the ports where the feature takes eect. For example, when Extend (Port 1-4) is toggled to On, the Extend mode will be enabled for

ports 1-4.

Installation

Connection

Desktop:

Attach the supplied feet to the

bottom of the switch to prevent it

from slipping when placed on a

desktop.

Note: For detailed information, please refer to

the Wall Mounting Guide on the device’s

support page.

Wall-mounting: