TP Link Omada Pro S4500-8GP Bruksanvisning

TP Link Växla Omada Pro S4500-8GP

Läs gratis den bruksanvisning för TP Link Omada Pro S4500-8GP (2 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 11 recensioner. Har du en fråga om TP Link Omada Pro S4500-8GP eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
© 2023 TP-Link 7106510430 REV1.0.0
Omada Pro Gigabit Smart Switch
1. To access the management page of the switch, open a browser and type
the switch’s IP address in the address eld, then press the Enter key.
If the switch obtains IP address from the DHCP server (typically a router), nd
the switch’s IP address on the DHCP server.
If not, use the default IP address to launch the switch’s 192.168.0.1
management page.
Note: Make sure the switch and computer are in the same subnet.
2. admin Enter for both the username and password in the lower case letters
to log in. The rst time you log in, change the password to better protect
your network and devices.
3. After a successful login, the main page will appear. You can click the menus
on the top side and left side to congure the corresponding functions.
Installation Guide
Conguration
LED Explanation
For the detailed congurations, refer to the User Guide and CLI Guide. The
guides can be found on the download center of our ocial website:
https://www.tp-link.com/support/download/.
Method 1: Standalone Mode
Switch PC
In Standalone Mode, use a computer to congure and manage the switch.
The switch supports two conguration methods:
Standalone Mode: Congure and manage the switch singly.
Controller Mode: Congure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as
access points, switches, and gateways.
Note: When the switch is changed from Standalone Mode to Controller Mode, congurations of the switch will be lost. For details, refer to the related documents on the download center of our
ocial website: https://www.tp-link.com/support/download/.
Note:
1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. Maximum PoE power is 30 W for each PoE port, and 62 W (for S4500-8GP)/61 W (for S4500-8GP2F) for all PoE ports.
3. PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as
a result of client limitations and environmental factors.
For simplicity, we will take S4500-8GP2F for example throughout the Guide.
Note:
1. Port 8 is a PD (Powered Device) port that supports being powered by a PSE (Power Sourcing Equipment) which
complies with LPS or PS2 standard and 802.3af/at standard.
2. The DC power input takes precedence over the PD port. If the DC input fails, the PoE input on the PD port will
supply power instead.
Ethernet Ports (18)
AC Power Cord
DC Power Adapter
Internet
PC
PSE
LED S Explanationtatus
P erow
On Power on
S temys
F F Systlashing lashing: em running normally
Link/Act
(port 1–8)
On (Green) Running at 1000 Mbps
On (Yell w) Running at 10/100 Mbpso
F Transmitting/receiving datalashing
No connected device
SPF1/SFP2
(For S4500-
8GP2F)
On (Green) Running at 1000 Mbps
On (Yell w) Running at 100 Mbpso
F Transmitting/receiving datalashing
No connected device
PoE Status
(For Port 1-4 of
S4500-8GP/Port
1-8 of S4500-
8GP2F)
On Providing PoE power
Flashing
Current-ov rt-cir t/Connected erload/Sho cui
to a non-standard PD/Power exceeded the
Not providing PoE Power
PoE MAX
(For S4500-8GP/
S4500-8GP2F)
On Remaining power supply ≤ 7W
Flashing Remaining pow k for er supply eeps ≤ 7 W
mor tese than 2 minu
Remaining power supply
> 7W
Connection for PoE Switch
Ethernet Ports (18)
PC IP Camera AP IP Phone
PoE Devices
DC Power Adapter
AC Power Cord
Internet
SFP Slots
Connection for Non-PoE Switch
For simplicity, we will take S4500-8G for example throughout the Guide.


Produktspecifikationer

Varumärke: TP Link
Kategori: Växla
Modell: Omada Pro S4500-8GP

Behöver du hjälp?

Om du behöver hjälp med TP Link Omada Pro S4500-8GP ställ en fråga nedan och andra användare kommer att svara dig