TP Link TL-SF1009P Bruksanvisning

TP Link Växla TL-SF1009P

Läs gratis den bruksanvisning för TP Link TL-SF1009P (3 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 1.5 recensioner. Har du en fråga om TP Link TL-SF1009P eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

Wall Mounting Guide

Wall Mountable Switches

1.1 Wall Mounting Preparation

Before mounting the switch, you need to prepare the tools below:

ǴA screw driver.

Two screws which complies to the corresponding standard. For details, see

Wall

Mounting Specification.

1.2 Wall Mounting Procedure

On the bottom of the panel, there are two mounting holes. You need to drive two screws

into the wall, then mount the switch on the wall. Note that the switch should be mounted

on the wall upright rather than sideways. For TL-SF1008P/TL-SF1008LP/TL-SF1009P/

TL-SG1008P, the switch should be mounted with the ports facing downward and the

LEDs facing upward.

1) Determine the location on the wall where you want to mount the switch.

2) Mark the wall where the two mounting holes are. The distance between the two marks

must be the same as that between the two mounting holes of the switch. For the wall-

mounting-holes distance, see .Wall Mounting Specification

3) Drive the screws into the wall at the marks using the screw driver. For the Screw-

Head-to-Wall Minimum Distance, see .Wall Mounting Specification

4) Mount the switch on the wall.

1.3 Wall Mounting Specification

Model

Screw Standard of

ANSI B1.1

Minimum Length

of Screw

Screw-Head-to-Wall

Minimum Distance

Wall-Mounting-Holes

Distance

LS105G 4#, (5#), 6# 7mm 1.5mm 76mm

LS108G 4#, (5#), 6# 7mm 1.5mm 65mm

LS1005G 4#, (5#), 6# 7mm 1.5mm 38mm

LS1008G 4#, (5#), 6# 7mm 1.5mm 48mm

TL-SF1005LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm

TL-SF1005P 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm

TL-SF1006P 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm

TL-SF1008LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm

TL-SF1008P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm

TL-SF1009P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm

TL-SF1016D 4#, (5#), 6# 8.5mm 1.5mm 157.2mm

TL-SG1005LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm

Model

Screw Standard of

ANSI B1.1

Minimum Length

of Screw

Screw-Head-to-Wall

Minimum Distance

Wall-Mounting-Holes

Distance

TL-SG1005P 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm

TL-SG1008D 4# 8mm 2mm 100mm

TL-SG1008P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm

TL-SG105 4#, (5#), 6# 7mm 1.5mm 39mm

TL-SG105E 4#, (5#), 6# 7mm 1.5mm 52mm

TL-SG105-M2 4#, (5#), 6# 7mm 1.5mm 150mm

TL-SG105PE 4#, (5#), 6# 7mm 1.5mm 39mm

TL-SG105S 4#, (5#), 6# 7mm 1.5mm 39mm

TL-SG108 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm

TL-SG108E 4#, (5#), 6# 7mm 1.5mm 110mm

TL-SG108-M2 4#, (5#), 6# 7mm 1.5mm 150mm

TL-SG108PE 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm

TL-SG108S 4#, (5#), 6# 7mm 1.5mm 94mm

TL-SG116 4#, 6# 8.5mm 1.5mm 200mm

TL-SG116E 4#, 6# 8.5mm 1.5mm 200mm

TL-SG1210MP 4#, (5#), 6#, 8# 8.5mm 1.5mm 150mm

TL-SG1210MPE 4#, (5#), 6#, 8# 8.5mm 1.5mm 150mm

TL-SG1210P 4#, (5#), 6#, 8# 7mm 1.5mm 150mm

TL-SG2008 4#, (5#), 6# 7mm 1.5mm 150mm

TL-SG2008P 4#, (5#), 6# 7mm 1.5mm 150mm

TL-SG2210P 4#, (5#), 6# 7mm 1.5mm 150mm

TL-SL1210MP 4#, (5#), 6#, 8# 7mm 1.5mm 150mm

TL-SL1311MP 4#, (5#), 6#, 8# 8.5mm 1.5mm 150mm

TL-SX105 4#, (5#), 6# 7mm 1.5mm 150mm

Produktspecifikationer

Varumärke:	TP Link
Kategori:	Växla
Modell:	TL-SF1009P
Färg på produkten:	Zwart, zilver
Sladdlängd:	1.8 m
Anslutningsteknik:	Bedraad
Bärmetod:	Hoofdband
Impedans:	32 Ohm
Placera högtalare hörlurar:	Supraaural
Hörlurars frekvensområde:	16 - 24000 Hz
3,5 mm-kontakt:	Ja
Hörlurskänslighet:	115 dB
Maximal-ineffekt:	500 mW
Hopfällbar:	Ja
Diameter på högtalaren:	40 mm
Löstagbar kabel:	Nee
Akustiskt system:	Gesloten
Lämplig för DJs:	Ja
Typ produkt:	Hoofdtelefoons
6,35 mm-kontakt:	Ja