TP Link VIGI NVR1008 Bruksanvisning

TP Link Videobandspelare VIGI NVR1008

Läs gratis den bruksanvisning för TP Link VIGI NVR1008 (92 sidor) i kategorin Videobandspelare. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 3.5 recensioner. Har du en fråga om TP Link VIGI NVR1008 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/92
Installation Guide
Network Video Recorder
CONTENTS
Deutsch
�����������������������
English
������������������������
Español �����������������������
ληνικά
�����������������������
13
Français
�����������������������
Italiano
������������������������
Português ���������������������
Suomi������������������������
Nederlands
����������������������
Svenska �����������������������
Norsk
������������������������
Dansk
������������������������
Bahasa Indonesia �������������������
日本語 ������������������������
繁體中文
�����������������������
ไทย ��������������������������
TiếngไViệtไ ����������������������
Türkçe
������������������������
يبرع
�������������������������
77
English
1
Note: images may dier from the actual products.
Hard Drive Installation
For first time installation, please prepare a 3.5-inch hard disk drive (HDD). It is
recommended to use the HDD of enterprise or surveillance level. Before installation,
please disconnect the power from the network video recorder (NVR).
1� Remove the xing screws on the side and back panels to open the cover of the
NVR.
2� Attach the 4 included HDD screws to your hard drive. Do not fasten.
Hard Disk Drive (HDD)
3� Match the 4 screws on the HDD with the 4 holes on the NVR, and insert the HDD
interface into the slot.

Produktspecifikationer

Varumärke: TP Link
Kategori: Videobandspelare
Modell: VIGI NVR1008

Behöver du hjälp?

Om du behöver hjälp med TP Link VIGI NVR1008 ställ en fråga nedan och andra användare kommer att svara dig