Trimble NMD 900B Bruksanvisning
Trimble
Streckkodsläsare
NMD 900B
Läs nedan 📖 manual på svenska för Trimble NMD 900B (58 sidor) i kategorin Streckkodsläsare. Denna guide var användbar för 12 personer och betygsatt med 5.0 stjärnor i genomsnitt av 6.5 användare
Sida 1/58
2
Limited Warranty & Liability Limitations
This product is limited warranted against defects in materials and workmanship for twelve
(12) months from the original date of purchase. Nomad accessories and peripherals are
limited warranted against defects in materials and workmanship for ninety (90) days from the
original date of purchase. If notice is received of such defects during the limited warranty
period, the proven defective product(s) will either be repaired or replaced, at the
manufacturer’s option. Replacement products may be either new or like new.
The manufacturer does not warrant that the operation of the products will be uninterrupted or
error free. If the product is not, within a reasonable time, repaired or replaced to a condition
as limited warranted, the customer will be entitled to a refund of the purchase price upon
prompt return of the product.
Limited warranty does not apply to defects resulting from (a) improper or inadequate
maintenance or calibration, (b) software, interfacing, parts, or supplies not supplied by
manufacturer, (c) unauthorized modification, or misuse, (d) operation outside of the published
environmental specifications for the product, or (e) physical damage due to external causes,
including accident, abuse, misuse or problems with electrical power. Water damage caused
by improper installation of the Expansion Caps or I/O Boots is not covered by warranty.
Removal of the back case voids the limited warranty. There are important seals that will break
and the Nomad will no longer be waterproof.
To the extent allowed by local law, the above limited warranties are exclusive and no other
warranty or condition, whether written or oral, is expressed or implied, specifically
disclaiming any implied warranties or conditions of merchantability, satisfactory quality, and
fitness for a particular purpose.
To the extent allowed by local law, the remedies in this limited warranty statement are
the customer’s sole and exclusive remedies. Except as indicated above, in no event will
the manufacturer or its suppliers be liable for loss of data or for direct, special,
incidental, consequential (including lost profit or data), or other damage, whether based
in contract, tort, or otherwise.
3
Contents
Welcome ......................................................................................3
Device Hardware .........................................................................4
Unit Setup ....................................................................................6
Working with the Unit and the Battery ...................................... 13
Status indicators ......................................................................... 18
Settings on your Unit ................................................................. 19
Communication ..........................................................................21
Connecting to a PC .................................................................... 21
Working with Bluetooth ............................................................ 23
Working with Wi- (802.11) Fi .................................................... 25
Working with the Camera .......................................................... 28
Working with the Scanner ......................................................... 31
Working with the GPS ............................................................... 32
Using SatViewer ........................................................................ 33
Working with the Wireless WAN .............................................. 47
Troubleshooting ......................................................................... 51
Caring for your Unit .................................................................. 52
Environmental Considerations ................................................... 53
Environmental Specifications .................................................... 54
Hardware Specifications ............................................................ 54
Regulatory Information ..............................................................55
Declaration of Conformity ......................................................... 56
Safe Use of your Unit ................................................................ 57
Welcome
Congratulations on your purchase of the Nomad® Handheld
Computer, the most powerful and advanced handheld computer
available on the market today. Its rugged design allows you to work
in harsh outdoor environments. You can operate your unit in blazing
heat, subzero cold, driving rain or dusty job sites places you could –
not take a consumer-grade handheld computer.
NOTE: Not all the features discussed in this manual will apply to
every unit, as some of the features are offered as options. If the
feature described does not apply to your unit, please disregard that
section.
4
Device Hardware
Front View
Numeric Data Keypad
Back View
with hand strap
Expansion Cap
Expansion Cap
I/O Boot
Bottom View
USB I/O Boot
Bottom View
Serial I/O Boot
Serial
External
Power
Mini-
USB
Client
USB
Host
External
Power
Mini-
USB
Client
Audio
Jack
*See settings for assignable application buttons (keys)
Backspace*
Enter*
Application
Soft Key *
Notification
LED
Battery
LED
OK*
Today*
Number pad and Navigation keys
For more information about the function key,
see page 19
Tab*
Power
Application
Soft Key *
Start*
Function Key*
Battery
Door
Screws
Battery
Door
Hand
Strap
Stylus
5
WWAN Option Second USB host Option
Expansion Cap (GPS Antenna)
900LD Model
Extended Cap Option
Sold as an Accessory
Top View
Standard
Top View
Camera & Scanner Expansion Cap
Expansion Cap
Camera only
Scanner & Camera
An Extended Cap, sold as an accessory, can be used for oversized
CompactFlash (CF) and Secure Digital (SD) cards.
NOTE: Be sure to read the warranty and safety information in this
manual prior to using your unit.
SD
slot
CF type II
or USB
SD
slot
Scanner
Camera
SD
slot
Camera
WWAN
Antenna
6
Unit Setup
1. Install the battery
The Lithium-Ion (Li-Ion) battery and
battery cover are shipped detached from the
unit. Insert the battery into the compartment
so the connectors on the battery mate with
the pins in the battery compartment. Press
firmly. Place the battery door over the
battery, with the flat side of the battery door
at the top.
Remove the rubber cap from the end of the
stylus to expose a Philips screwdriver, or
use a small #1 Philips head screwdriver to
finger-tighten the four screws in the battery
door.
NOTE DO NOT: use the screwdriver part of the stylus on
the touchscreen or it will scratch your screen. Only use the
spring-tip end of the stylus.
2. Charge the battery
The power supply that ships with your unit has four international
plugs that fit almost every electrical outlet in the world. Connect the
appropriate plug to the power cord and attach the power supply.
Plug into an electrical outlet and plug the barrel end of the power
supply into the unit.
Warning! Be sure to only use the power supply
included with your unit. Use of other adapters
may void the product warranty.
3. Attach the hand strap
Attach the hand strap to the back case, as shown.
IMPORTANT Fully charge the battery : once it’s installed in the
unit. The battery gauge may not be accurate until it has been
fully charged at least one time, which should take
approximately 4 ½ hours. The battery LED (right side of unit)
will turn green once it’s fully charged.
7
4. Apply the screen protector
To keep the touchscreen clean and protected, apply the screen
protector following the instructions provided in the screen protector
package. Unprotected screens become scratched and scuffed over
time. Screen protectors extend the life of the display by providing a
protective and replaceable barrier between abrasive grit and the
surface of the display. It is recommended to replace the screen
protector every 2 months, or more often if heavily used.
Screen damage associated with not using a screen protector, not
using the approved screen protector or failure to follow the
instructions for installation may void the product warranty.
5. Turning your unit on and off
The unit should boot up when the battery is installed. If not, press
and release the green key on the keypad. To turn your unit Power
off, press and release the Power key again.
One of the most convenient features of your unit is
―suspend/resume‖. There is no waiting for the unit to boot up every
time it is turned on. (It does not occur on the first boot-up.)
9
NOTE: Only Microsoft applications and messages will be
translated into languages other than English. All other error
messages, notifications and other applications may appear in
English.
7. Align screen
When the unit first turns on, the message ―Tap the screen to set up
your Windows Mobile-based device‖ will appear.
The align screen message will display a series of targets to tap in
sequence on the screen. Use the stylus to tap the targets firmly and
accurately. Sometimes you need to repeat the alignment procedure
more than once to provide a satisfactory alignment.
8. Location time zone –
Select your time zone location, set the time and date to the correct
values and tap . Next
9. Password lock (optional) –
You do not have to provide a password unless you are concerned
about unauthorized use. To eliminate using a password, tap Skip.
If you opt for password protection the password must be entered
every time the unit is turned on or the key is pressed to Power
resume operation.
WARNING: BE CERTAIN TO REMEMBER THE PASSWORD.
The only way to recover from a forgotten password is to perform a
Clean Boot and you will LOSE all application software, licenses,
settings and data on your unit. See page 17 on how to perform a
Clean Boot.
10. Using the expansion ports
To access the expansion ports, use the
Philips screwdriver end of the stylus or a
small #1 Philips head screwdriver to
rotate the two quarter-turn fasteners counter-clockwise and remove
the Expansion Cap.
Under the Expansion Cap is a Secure Digital (SD) expansion slot.
Depending upon the configuration of your unit, it may contain a
10
CompactFlash (CF) type II slot, USB port, a camera and/or a scanner.
The scanner and camera units have a clear window in the cap.
Gently insert cards into the slot and
release; the card should catch in the slot.
Make sure the front of the card faces the
display side of the unit. Push the cards
in straight, never at an angle or forced.
To eject SD card, gently press the top of the card to release . To an it
eject a CF card, press the eject button next to the CF card.
There may be a foam bumper inside the expansion cap. When
present, SD cards will be retained in 900B and 900L units when
dropped within the product specification. On the LD unit, only USB
storage devices that are 1.75 inches long are supported in drop. USB
devices that are longer than 1.75 inches may reduce GPS
performance.
NOTE: DO NOT use the unit without reattaching the cap and the
boot. The unit is NOT sealed when the cap or boot is off and water
damage can occur, possibly voiding the warranty.
SD slot
CF slot
type II
Produktspecifikationer
| Varumärke: | Trimble |
| Kategori: | Streckkodsläsare |
| Modell: | NMD 900B |
Behöver du hjälp?
Om du behöver hjälp med Trimble NMD 900B ställ en fråga nedan och andra användare kommer att svara dig
Streckkodsläsare Trimble Manualer
5 September 2024
28 Augusti 2024
27 Augusti 2024
26 Augusti 2024
26 Augusti 2024
Streckkodsläsare Manualer
- Streckkodsläsare ZBA
- Streckkodsläsare Baracoda
- Streckkodsläsare Code
- Streckkodsläsare Qian
- Streckkodsläsare Renkforce
- Streckkodsläsare EC Line
- Streckkodsläsare Steren
- Streckkodsläsare Deltaco
- Streckkodsläsare Mach Power
- Streckkodsläsare DENSO
- Streckkodsläsare Qoltec
- Streckkodsläsare Vultech
- Streckkodsläsare Nilox
- Streckkodsläsare Cypress
- Streckkodsläsare CipherLab
Nyaste Streckkodsläsare Manualer
2 April 2025
2 April 2025
1 April 2025
27 Februari 2025
27 Februari 2025
27 Februari 2025
25 Februari 2025
23 Februari 2025
21 Februari 2025
21 Februari 2025