Tripp Lite B110-SP-10G Bruksanvisning
Tripp Lite
Inte kategoriserad
B110-SP-10G
Läs gratis den bruksanvisning för Tripp Lite B110-SP-10G (32 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2 recensioner. Har du en fråga om Tripp Lite B110-SP-10G eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/32
In-Line Network
Surge Protector,
10 Gbps, Cat6a
Model: B110-SP-10G
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2022 Tripp Lite. All rights reserved.
Quick Start Guide
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
®
surge protector in our monthly drawing!
tripplite.com/warranty
Español 9 • Français 17 • Русский 25
2
• B110-SP-10G 10 Gbps In-Line Network Surge Protector
• Grounding Wire
• Mounting Screws (x4)
• Screw Anchors (x4)
• Grounding Wire Screw
• Quick Start Guide
• Protects your network equipment’s inputs and outputs against electro-
static discharge (ESD), power surges and cable discharge events
• Meets the following IEC regulations:
o IEC 61000-4-2: Indirect discharge (4kV), direct discharge (8kV)
o IEC 61000-4-5 (Lightning) 2kA (8/20µs), 1kV (8/20µs)
• Easy to connect between network source and device using
standard Cat5/5e/6/6a/8 cabling
• Rapid reaction time under 1 ns helps prevent damage from
lightning/power surges
• Supports Ethernet network data transmission speeds up to 10 Gbps
• Plug-and-play operation with no software required for easy,
immediate installation
• Supports distance between the B110-SP-10G and equipment up
to 330 ft. (100 m)
• Compliant with the Federal Trade Agreements Act (TAA) for GSA
(General Services Administration) Schedule and other federal
procurement contracts
Package Includes
Product Features
3
Note: The following instructions assume that two network devices are
currently connected together.
Single Device Protection:
1. Disconnect the installed patch cable from the device you wish
to protect and attach it to the “Cable End” of the In-Line 10G
Network Surge Protector.
2. With a user-supplied Cat5/5e/6/6a/8 patch cable, connect the
device to be protected to the “Equipment End” of the In-Line
10G Network Surge Protector.
Note: For best protection performance, the patch cable between
the “Equipment End” on the B110-SP-10G and the equipment
to be protected should not exceed 330 ft. (100 m). Tripp Lite’s
N261-Series Cat6a Snagless Patch Cables are recommended.
3. Connect the ground wire to the In-Line 10G Network Surge
Protector and then to earth ground.
Installation
Produktspecifikationer
| Varumärke: | Tripp Lite |
| Kategori: | Inte kategoriserad |
| Modell: | B110-SP-10G |
Behöver du hjälp?
Om du behöver hjälp med Tripp Lite B110-SP-10G ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Tripp Lite Manualer
1 April 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
Inte kategoriserad Manualer
- Lexar
- Redrock Micro
- Adler
- Fire Sense
- V-Tac
- Dot Line
- Zoofari
- Bobrick
- Advantech
- Eartec
- Beltronics
- Life Fitness
- Sumiko
- Pro-Ject
- Grüniq
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025