Tripp Lite B125-101-60-IR Bruksanvisning
Tripp Lite
mottagare
B125-101-60-IR
Läs gratis den bruksanvisning för Tripp Lite B125-101-60-IR (8 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2 recensioner. Har du en fråga om Tripp Lite B125-101-60-IR eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
1
Owner’s Manual
HDMI + IR over Dual
Cat5/Cat6 Extender Kit
Model: B125-101-60-IR
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2016 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
16-02-445-9334B1.indd 1 3/10/2016 11:27:09 AM
2
Features
Package Includes
Optional Accessories
• Extend a 1920 x 1080 (1080p) @ 60Hz signal up to 150 ft. using
Cat5/Cat6 cabling
• IR control allows you to use your HDMI source’s remote control in the
same location as your extended monitor
• Supports 7.1 Channel Surround Sound, DTS-HD and Dolby® TrueHD
audio
• Receiver unit features built-in Equalization control to adjust video image
• Supports EDID passthrough; HDCP and 3D compatible
• Plug-and-play; no software required
• Transmitter and Receiver Units
• IR-TX and IR-RX Cables
• (x2) External Power Supplies (Input: 100-240V, 50/60Hz, 0.5A
Output: 9V, 1A)
• Screwdriver for Equalization adjustment
• Owner’s Manual
• N202-Series Cat6 24 AWG Solid Wire Patch Cables
• P568-Series High Speed HDMI Cables
16-02-445-9334B1.indd 2 3/10/2016 11:27:09 AM
3
Installation
Refer to the installation diagram below as you perform these steps.
Notes:
1. Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
2. To achieve maximum distance and performance, 24 AWG solid wire Cat5e/6 cable
must be used. The use of stranded wire Cat5e/6 cable or cable with a gauge size
higher than 24 AWG will result in shorter extension distance. All Tripp Lite
N202-Series Cat6 cables are made with 24 AWG, solid wire cabling.
7
83
9
6
5
CH1
CH2
TRANSMIT TER RECEIVER
Blu-ray™ PLAYER
1080p (60 Hz)
DISPLAY
1080p (60 Hz)
Up to 150 ft. Cat5e/6
2
4
1. Make sure all equipment being connected is powered off.
2. Connect the HDMI source to the HDMI input on the transmitter unit.
3. Connect the IR-TX cable to the IR port on the transmitter unit.
Note: The IR-TX cable transmits the IR signal to the device being controlled.
Locate the IR-TX unit in an area with clear line of sight to the source
(e.g. Blu-ray player).
4. Connect the external power supply to the transmitter, then plug it into a
Tripp Lite Surge Protector, Uninterruptible Power Supply (UPS), or Power
Distribution Unit (PDU). The green LEDs on both the transmitter and
receiver units will illuminate to indicate that power is being received.
The orange LED on the receiver unit will illuminate to indicate that a
connection has been made with the transmitter unit via Cat5e/6 cable.
5. Connect the CH1 RJ45 port on the transmitter to the CH1 RJ45 port on
the receiver using Cat5e/6 cable.
Note: See the installation diagram for maximum extension distance at 1080p
(60Hz) video resolutions.
16-02-445-9334B1.indd 3 3/10/2016 11:27:09 AM
Produktspecifikationer
| Varumärke: | Tripp Lite |
| Kategori: | mottagare |
| Modell: | B125-101-60-IR |
Behöver du hjälp?
Om du behöver hjälp med Tripp Lite B125-101-60-IR ställ en fråga nedan och andra användare kommer att svara dig
mottagare Tripp Lite Manualer
2 Oktober 2024
18 September 2024
30 Augusti 2024
28 Augusti 2024
28 Augusti 2024
23 Augusti 2024
23 Augusti 2024
22 Augusti 2024
22 Augusti 2024
20 Augusti 2024
mottagare Manualer
- Block
- Teac
- Hertz
- ETON
- CYP
- Artsound
- Harper
- Krell
- MuxLab
- Aguilar
- Phonic
- Crest Audio
- Panduit
- KanexPro
- Vincent
Nyaste mottagare Manualer
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025