Tripp Lite N044-000-R Bruksanvisning
Tripp Lite
Kablar för PC och kringutrustning
N044-000-R
Läs gratis den bruksanvisning för Tripp Lite N044-000-R (16 sidor) i kategorin Kablar för PC och kringutrustning. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 9 recensioner. Har du en fråga om Tripp Lite N044-000-R eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/16
1
Owner's Manual
Purchased product
may differ from image.
Model:
N044-000·R
Multi-Functional Network Cable
Tester
Español 4
Français 7
Deutsch 10
Italiano 13
2
Functions
BNCIF Testing Procedures
Double-Twisted Cable Testing Procedures
Abnormal Connections
1. Tests BNC, F, RJ11, RJl 2 and RJ45 cables.
2. Tests double-twisted cables (1,2,3,4,5,6,7,8 and G) and identifies wrong
connection, short circuit and open circuit.
1. For BNC cable testing, connect the BNC cable to the female (F) connector on the
main tester, then connect the other end to the BNC terminator. The BNC
terminator and the main tester's B/F light will illuminate green, indicating proper
function.
2. For F cable testing, connect the BNC (M-F) adapters to the BNC female (F)
connector on the main tester and the BNC terminator. Then connect the F cable
to the tester and terminator. The BNC terminator and the main tester's B/F light
will illuminate green, indicating proper function.
1. Switch on the power. ("S" is slow automatic grade. "M" is manual.)
2. Insert cables into main tester and remote tester. The main tester lights will
illuminate sequentially from 1 to G.
Main Tester: 1-2-3-4-5-6-7-8-G
Remote Tester: 1-2-3-4-5-6-7-8-G ..........RJ45
1-2-3-4-5-6 ......................RJ12
1-2-3-4 .............................RJ11
1. While testing a cable (for example, Pin No. 3 has an open circuit) the main and
remote tester will not light up.
2. If two ends of a cable are out of order (for example, Pins No. 2 and No. 4), the
tester will display the following:
Main Tester: 1-2-3-4-5-6-7-8-G
Remote Tester: 1-4-3-2-5-6-7-8-G
3. If the cable has a short circuit, the main tester lights will remain sequentially on
and the remote tester lights will remain off.
3
WARNING
• Do not use the network cable tester to test any electrified products.
• For best test results, change the tester's 9V battery (not included) when weak
lights appear.
• Do not test RJ45 cables that are not completely terminated . Improper use can
cause permanent damage to the tester.
• Do not use 8P8C jacks to test RJl 1 and RJl 2 cables. Improper use can cause
permanent damage to the tester.
Eaton has a policy of continuous improvement. Specifications are subject to change
without notice.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2024 Eaton
All Rights Reserved
Publication No. 24-02-041 / 93-3067_revD
March 2024
Eaton is a registered trademark.
All trademarks are property
of their respective owners.
933067
Produktspecifikationer
| Varumärke: | Tripp Lite |
| Kategori: | Kablar för PC och kringutrustning |
| Modell: | N044-000-R |
Behöver du hjälp?
Om du behöver hjälp med Tripp Lite N044-000-R ställ en fråga nedan och andra användare kommer att svara dig
Kablar för PC och kringutrustning Tripp Lite Manualer
3 April 2025
31 December 2025
31 December 2025
20 September 2024
4 September 2024
25 Augusti 2024
24 Augusti 2024
23 Augusti 2024
23 Augusti 2024
20 Augusti 2024
Kablar för PC och kringutrustning Manualer
- Arris
- Atlona
- Hall Research
- Hobbes
- ACV
- Advance Acoustic
- ISimple
- Shure
- Xiaomi
- Gefen
- Pyle
- Satechi
- Icy Box
- Chief
- Aluratek
Nyaste Kablar för PC och kringutrustning Manualer
9 April 2025
5 April 2025
5 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
2 April 2025
2 April 2025
2 April 2025