Tripp Lite N252-P24 Bruksanvisning


Läs gratis den bruksanvisning för Tripp Lite N252-P24 (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 7 recensioner. Har du en fråga om Tripp Lite N252-P24 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
Quick Start Guide
Installation
1
3
2
4
24-Port 1U Rack-Mount Power over Ethernet
(PoE)* 110 Patch Panels
Models: N052-P24 (Cat5e), N252-P24 (Cat6)
Español 3 • Français 5 • Русский 7
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
22-24 AWG
Avoid gaps
Wrap strap
around cables.
Figure 1: T568A/B Wiring Scheme
Strip the cable jacket approximately 1.25 in. (30 mm).
Use a 110 impact tool for termination.
Note: Set the tool to the “Low Impact” setting.
Seat each wire according to the wiring scheme shown in Figure 1.
Ensure the untwisted length is as short as possible. Avoid overlapping
one pair over the others.
Note: 110 punchdown orientation may vary by model.
In order to maintain stable performance, ensure the cable bundles
are secured with the attached straps.
To maximize performance with Power ovwer Ethernet (PoE) applications, these patch panels are specially designed to prevent spark-gap erosion
that degrades the plug and jack contacts over time and can impact data and/or power transmission capabilities.
17-11-012-933783.indb 1 11/28/2017 1:55:05 PM


Produktspecifikationer

Varumärke: Tripp Lite
Kategori: Inte kategoriserad
Modell: N252-P24

Behöver du hjälp?

Om du behöver hjälp med Tripp Lite N252-P24 ställ en fråga nedan och andra användare kommer att svara dig