Tripp Lite N286-01GSX-MLC Bruksanvisning
Tripp Lite
Inte kategoriserad
N286-01GSX-MLC
Läs gratis den bruksanvisning för Tripp Lite N286-01GSX-MLC (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 2 recensioner. Har du en fråga om Tripp Lite N286-01GSX-MLC eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
HP Compatible
1000Base-SX SFP
Transceiver with MMF,
850 nm, 550 m, LC
Model: N286-01GSX-MLC
Quick Start Guide
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Copyright © 2016 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
16-09-100-9335FD-EN.indd 1 9/12/2016 10:08:43 AM
2
Product Features
Optional Accessories
Package Includes
• 1000Base-SX transceiver supports data
transfer rates up to 1000 Mbps
• Compliant with SFP Multi-Source Agreement
(MSA)
• 1,804 ft. (550 m) transmission distance
using 50/125 MMF cabling or 722 ft.
(220 m) using 62.5/125 MMF cabling
• HP switch compatible
• Hot-pluggable
• N520-Series Duplex Multimode 50/125 LC
Fiber Cables
•
N320-Series Duplex Multimode 62.5/125 LC
Fiber Cables
• P999-000 Anti-Static Wrist Strap
• N286-01GSX-MLC
• Quick Start Guide
16-09-100-9335FD-EN.indd 2 9/12/2016 10:08:43 AM
3
Installation
Notes:
• SFP transceiver modules are static-sensitive
devices that require proper handling. An anti-static
ESD wrist strap or similar device should always be
used when handling a transceiver module.
• The transceiver module should never be installed
with cables already connected. Always remove
cables prior to installation to avoid damaging the
cable, cable connectors, and/or optical interface.
• Installing and uninstalling the transceiver module
numerous times will shorten its useful lifespan. Do
not uninstall and reinstall the module more than is
absolutely necessary.
1. Remove the transceiver module from its
packaging, leaving the dust plug inserted in
the LC optical bores.
2. Gently insert the transceiver module into the
module socket of your device, pressing on
the dust plug until it locks into place.
3. Verify the transceiver module is locked into
place by trying to remove it from the module
socket without releasing the latch. If it stays
in place, it is seated properly. If not, you will
need to re-insert it, firmly pressing on the
dust plug until it locks into place.
16-09-100-9335FD-EN.indd 3 9/12/2016 10:08:43 AM
Produktspecifikationer
| Varumärke: | Tripp Lite |
| Kategori: | Inte kategoriserad |
| Modell: | N286-01GSX-MLC |
Behöver du hjälp?
Om du behöver hjälp med Tripp Lite N286-01GSX-MLC ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Tripp Lite Manualer
1 April 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
Inte kategoriserad Manualer
- King Canopy
- Morningstar
- Grothe
- Uniprodo
- Dension
- SwitchBot
- Brinno
- Sightmark
- Iomega
- PulseAudio
- Zanussi
- Microlab
- Heidemann
- Naturn Living
- Ooni
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025