Tripp Lite P937-000 Bruksanvisning

Tripp Lite ej kategoriserat P937-000

Läs gratis den bruksanvisning för Tripp Lite P937-000 (16 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 6.5 recensioner. Har du en fråga om Tripp Lite P937-000 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/16

Owner’s Manual

40-Pin Male IDE to

2.5”/3.5”/5.25” SATA Adapter

Model: P937-000

1111 W. 35th Street, Chicago, IL 60609

www.tripplite.com/support

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

Español 5 • Français 9 • Русский 13

17-02-305-9336C4.indb 1 3/6/2017 4:44:21 PM

Product Features

System Requirements

Package Includes

Installation

• Connect a SATA drive to an IDE/ATA motherboard

• Ideal for older motherboards that do not support SATA

• Optical Disk Drive (ODD) support, including Blu-ray™, DVD and

CD-ROM drives

• Supports data transfer rates up to 6 Gbps (SATA I/II/III)

• Compatible with Ultra ATA 133 speciﬁcation

• Plug-and-Play; no software or drivers required

• Computer with an available IDE connection

• SATA drive

• 40-pin IDE drive cable

• P937-000

• 4-Pin Molex Power Cable

• Owner’s Manual

Note: To use the installed SATA drive as a bootable device, it must be able to

operate in Master Mode

1. Turn off the computer, unplug its power cord, and disconnect all

peripheral devices (e.g. monitor, keyboard, etc.).

2. Open the computer chassis. Make sure the hard drive is fastened

to the chassis appropriately.

17-02-305-9336C4.indb 2 3/6/2017 4:44:21 PM

Installation

3. Using the jumper (J3) provided on the circuit board, select the

mode you want the installed SATA drive to operate under (S for

Slave, M for Master).

4. Connect the SATA drive to the circuit board using the designated

SATA power and data ports. Insert the connector on the board into

the drive ports.

5. Connect the LP4 end of the provided 4-Pin Molex Cable to the

computer’s power supply and the SP4 end to the adapter unit’s

power port.

6. Using a 40-Pin IDE cable, connect the IDE connector on the

adapter unit’s circuit board to an available IDE port on the

motherboard. The pin positioning will ensure a proper connection.

An arrow on the circuit board indicates Pin 1 of the IDE connector.

7. Replace the computer chassis and power cord on the computer.

Warranty & Product Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period

of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is

limited to repairing or replacing (at its sole option) any such defective products. To obtain service

under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP

LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an

authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied

by a brief description of the problem encountered and proof of date and place of purchase.

This warranty does not apply to equipment which has been damaged by accident, negligence or

misapplication or has been altered or modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid

limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Speciﬁcally, TRIPP LITE is not liable

for any costs, such as lost proﬁts or revenue, loss of equipment, loss of use of equipment, loss of

software, loss of data, costs of substitutes, claims by third parties, or otherwise.

17-02-305-9336C4.indb 3 3/6/2017 4:44:21 PM

Produktspecifikationer

Varumärke:	Tripp Lite
Kategori:	ej kategoriserat
Modell:	P937-000
Höjd:	30 mm
Förpackningens bredd:	150.9 mm
Ursprungsland:	Kina
Värdgränssnitt:	IDE
Produktens färg:	Röd
Låddjup:	130 mm
Vikt inkl. förpackning:	10 g
Ytterförpackningens bruttovikt:	750 g
Ytterförpackningens höjd:	145 mm
Produkter per ytterförpackning:	10 styck
Ytterförpackningens längd:	169.9 mm
Ytterkartong GTIN (EAN/UPC):	10037332199734
Ytterförpackningens bredd:	277.9 mm
Hållbarhetscertifiering:	RoHS
Harmonized System (HS)-kod:	8473.30.9100
Intern:	Ja
Utgränssnittet:	SATA