Tripp Lite SRCOOL7KDUCT Bruksanvisning

Läs gratis den bruksanvisning för Tripp Lite SRCOOL7KDUCT (16 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om Tripp Lite SRCOOL7KDUCT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/16
Owner’s Manual
SmartRack® Accessories
Model: SRCOOL7KDUCT
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 Tripp Lite. All rights reserved.
Table of Contents
Introduction 2 .......................................................
Parts List 2 ...........................................................
Installation 3 ........................................................
Warranty and Product Registration 6 .....................
Español............................................................... 7
Français 12 ............................................................
2
Introduction
Parts List
Tripp Lite’s SRCOOL7KDUCT is a venting system that is compatible with the SRCOOL7KRM Rack-Mounted
Air Conditioning Unit. The SRCOOL7KDUCT attaches directly to the SRCOOL7KRM unit to dissipate heat
generated from the air conditioning unit and direct the hot air through a vent upwards into your facility’s
return air duct or other standard ventilation system. The SRCOOL7KDUCT helps your rack equipment stay
cool and perform at its peak while reducing your facility’s cooling and energy costs.
Manifold Assembly (x1) Short Exhaust Tube (x1) Long Exhaust Tube (x1) Tube Adapter (x2)
Internal magnets attach
to rack enclosure.
Ceiling Adapter (x1) Ceiling Tile Insert (x1) M4 x 12 mm Screws (x4) Self-Tapping Screws (x4)
3
Installation
Before proceeding to install the SRCOOL7KDUCT, first make sure the air conditioning unit is correctly installed per the
instructions shown in the SRCOOL7KRM Owner’s Manual.
1 Fasten the Manifold Assembly to rear of SRCOOL7KRM using the
four (4) included M4 screws.
1
2
3
4
2 Attach the Short Flexible Tube to the Manifold Assembly by
turning the tube’s threaded end into the manifold’s adapter.
3 Attach the Short Flexible Tube to the Tube Adapter by turning the
adapter onto the tube’s threaded side.
4 Attach the Tube Adapter to the inside of the perforated rack
enclosure door A.
The Tube Adapter uses internal magnets to attach to the rack Note:
enclosure.
A

Produktspecifikationer

Varumärke: Tripp Lite
Kategori: Inte kategoriserad
Modell: SRCOOL7KDUCT

Behöver du hjälp?

Om du behöver hjälp med Tripp Lite SRCOOL7KDUCT ställ en fråga nedan och andra användare kommer att svara dig