Tripp Lite SRSEHOOD Bruksanvisning
Tripp Lite
Inte kategoriserad
SRSEHOOD
Läs gratis den bruksanvisning för Tripp Lite SRSEHOOD (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om Tripp Lite SRSEHOOD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
1
WARNING: Do not attempt to use the roof panel for weight-bearing purposes other than those
explicitly described and approved by Tripp Lite. Do not attempt to add or remove the roof panel without
assistance.
Installation Instructions
SmartRack® Service Entry Hood
Model: SRSEHOOD
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty
1. Remove the Roof Panel
Models with a Toolless Roof
1 Pull the 2 pins near the rear of
the roof panel A. While holding
the pins, push the roof panel
upward B.
2 Remove the roof panel tabs A
from the roof panel attachment
slots B in the enclosure frame.
3 Lift the roof panel from the
enclosure.
1 2 3
B
A
A
B
Español 3 • Français 5 • Русский 7
2
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
21-04-128 93-3ECE_RevA
Tripp Lite has a policy of continuous improvement. Product specifications are subject to change without notice.
Photos and illustrations may differ slightly from actual products.
2. Installing the Drip-Resistant Cable Access
Housing
1 Remove one of the rubber sealing plugs from the top rear of the
enclosure by pushing it out from inside of the unit.
2 Using the included M4 x 8 mm pan head machine screws and toothed
washers (4 of each), fasten the screws into each of the threaded
holes.
1 2
1 2
1. Remove the Roof Panel (continued)
Models with Screws Securing the Roof
1 Remove the four 4 screws (2 on front, 2 on back) that
attach the roof panel to the unit.
2 Lift the roof panel from the enclosure.
3
ADVERTENCIA: No intente usar el panel de techo para soportar pesos que no sean los descritos
explícitamente y aprobados por Tripp Lite. No intente colocar o retirar el panel de techo sin ayuda.
Instrucciones de Instalación
Capuchón de Entrada para
Servicio SmartRack®
Modelo: SRSEHOOD
1111 W. 35th Street, Chicago, IL 60609, EE. UU. • tripplite.com/support
Copyright © 2021 Tripp Lite. Todos los derechos reservados.
1. Retire el Panel del Techo
Modelos con Techo Sin Herramientas
1 Jale las 2 clavijas cercanas a la
parte trasera del panel de techo A.
Mientras las sostiene, empuje el
panel de techo hacia arriba B.
2 Retire las pestañas A de las
ranuras de fijación del panel de
techo B en el marco del gabinete.
3 Levante el panel de techo del
gabinete.
1 2 3
B
A
A
B
English 1 • Français 5 • Русский 7
Produktspecifikationer
| Varumärke: | Tripp Lite |
| Kategori: | Inte kategoriserad |
| Modell: | SRSEHOOD |
Behöver du hjälp?
Om du behöver hjälp med Tripp Lite SRSEHOOD ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Tripp Lite Manualer
1 April 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
Inte kategoriserad Manualer
- Watercool
- Kichler
- Delta
- SXT
- N8WERK
- Edgestar
- Muller
- RGV
- Monzana
- Fetch
- Fisher And Paykel
- Nebula
- Neutrik
- K&K Sound
- Silent Knight
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025