Tripp Lite T016-004-K Bruksanvisning
Tripp Lite
Inte kategoriserad
T016-004-K
Läs gratis den bruksanvisning för Tripp Lite T016-004-K (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 2 recensioner. Har du en fråga om Tripp Lite T016-004-K eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
Owner’s Manual
4-Piece Network Installer
Tool Kit with Carrying Case
Model: T016-004-K
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2016 Tripp Lite. All rights reserved.
Package Contents
• Cable Tester
• Crimping Tool
• LSA Punchdown Tool
• Stripper Tool
• Carrying Case
• Owner’s Manual
16-07-119-9335F3-EN.indd 1 8/5/2016 9:48:43 AM
2
Operation
Product Features
Note: Before testing, insert a 9V battery (not included) and make sure the cable being
tested is not yet connected to the tester.
Testing is as simple as connecting the desired cable and moving the OFF/
ON/S switch to “ON” for fast LED flashing or “S” for slow. When testing
an uninstalled patch cable, you can leave the Main and Remote testers
connected to each other.
When testing an installed cable, remove the Remote Tester from the Main
Tester. Connect one end of the cable to the appropriate connector on the
Main Tester, and the other end of the cable to the appropriate connector on
the Remote Tester.
Upon switching to the desired testing mode, the LEDs on the Main and
Remote Tester will illuminate to indicate the results.
Connected:
When a connection from one end of the cable to the other is found, the
LEDs on the unit will illuminate. Listed below are the pins that are supposed
to be illuminated for each connector type.
• – Pins 1 through 8 should be connectedRJ45 (UTP)
• ) – Pins 1 through 8 and the G pin should be connectedRJ45 (STP
• – RJ11 cables can be 2-wire, 4-wire, or 6-wire. 2-wire RJ11 cables RJ11
use pins 3 and 4, 4-wire pins 2-5, and 6-wire pins 1-6
• – Pins 1 through 6 should be connectedRJ12
• Kit includes cable tester, crimping tool, LSA punchdown tool, and stripper
tool along with a carrying case
• RJ45, RJ11 and RJ12 cable tester combines a Main Tester unit with a
removable Remote Tester unit
• Tests cable connectivity, determining a connection, no connection, short
or open circuit, with LED lights indicating the type of connection
•
Features modes for fast and slow flashing of LEDs during automatic testing
16-07-119-9335F3-EN.indd 2 8/5/2016 9:48:43 AM
3
Operation
No Connection:
If there is no connection found between the connectors of the cable being
tested, the LEDs on the units will not illuminate.
Mis-Wire:
If the wires in the cable are out of order, the LEDs on the Remote Tester will
illuminate to show what order they are wired in.
Open Circuit:
If the same LEDs on both the Main and Remote units remain off, the
corresponding wire is an open circuit.
Short Circuit:
If one or two wires are short circuited, the remote LEDs will not light up. If
three or more wires are short circuited, no LEDs light on either the Main or
Remote Tester.
Warranty and Product Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period
of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited
to repairing or replacing (at its sole option) any such defective products. To obtain service under
this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or
an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized
TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief
description of the problem encountered and proof of date and place of purchase. This warranty does
not apply to equipment, which has been damaged by accident, negligence or misapplication or has
been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid
limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS
PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not
liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss
of software, loss of data, costs of substitutes, claims by third parties, or otherwise.
16-07-119-9335F3-EN.indd 3 8/5/2016 9:48:43 AM
Produktspecifikationer
| Varumärke: | Tripp Lite |
| Kategori: | Inte kategoriserad |
| Modell: | T016-004-K |
Behöver du hjälp?
Om du behöver hjälp med Tripp Lite T016-004-K ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Tripp Lite Manualer
1 April 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
Inte kategoriserad Manualer
- CHINT
- Powerfix
- BSS Audio
- Oscium
- Harman Kardon
- V-Tone
- ZKTeco
- Noxon
- Gerber
- Bowers And Wilkins
- Dension
- Deye
- Aqua Medic
- Rusta
- AMC
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025