Tripp Lite U457-025-G2-WPB Bruksanvisning
Tripp Lite
Inte kategoriserad
U457-025-G2-WPB
Läs gratis den bruksanvisning för Tripp Lite U457-025-G2-WPB (16 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 1.5 recensioner. Har du en fråga om Tripp Lite U457-025-G2-WPB eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/16
Quick Start Guide
USB-C 3.1 SATA SSD/HDD
Water-Resistant Enclosure with
Built-In Cable for 2.5-Inch Drives
Models: U457-025-G1-WPG (USB 3.1 Gen 1, 5 Gbps),
U457-025-G2-WPB (USB 3.1 Gen 2, 10 Gbps)
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
tripplite.com/warranty
Español 5 • Français 9 • Русский 13
2
Product Features
Package Contents
System Requirements
• U457-025-G1-WPG (SuperSpeed USB 3.1 Gen 1, 5 Gbps) or
U457-025-G2-WPB (SuperSpeed USB 3.1 Gen 2, 10 Gbps)
• Mini Screwdriver
• Screws (x10)
• Washers (x10)
• Quick Start Guide
• USB 3.1 Gen 1 (5 Gbps) port required to achieve maximum speeds for
U457-025-G1-WPG
• USB 3.1 Gen 2 (10 Gbps) port required to achieve maximum speeds
for U457-025-G2-WPB
• UASP-enabled host controller required to achieve UASP performance
• 2.5 in. SATA HDD or SSD with maximum height of 9.5 mm
• Converts any 2.5 in. internal SATA SSD (solid state drive) or HDD
(hard disk drive) into an external hard drive for storing data
• Designed for 2.5 in. SATA drive heights between 7 mm and 9.5 mm
• Supports SATA III (6 Gbps), II (3 Gbps) and I (1.5 Gbps) drives
• Backward compatible with USB 3.0, 2.0 and 1.1 devices
• Water-resistant and dust-tight to comply with IP66 standards
• UASP-compatible for enhanced performance
• Bus-powered plug-and-play operation with no software or external
power required
3
Installation
1 Remove the back cover (side with the screw holes) of the SSD/HDD
enclosure.
2 Connect your 2.5 in. SATA SSD/HDD to the SATA connector.
3 Once the SATA SSD/HDD is securely in place, replace the back cover,
ensuring the screw holes line up with one another.
4 Using the included screwdriver, screws and washers, fasten the 10
screws and washers securely to the enclosure.
In order to comply with IP66 standards, screws need to be properly Note:
tightened to the enclosure.
5 Connect the built-in USB 3.1 Type-C cable to an available USB port on
your computer.
Drive Connection 22-Pin SATA Data + Power
USB Connection USB Type-C (Male)
Maximum Data Transfer Rate 10 Gbps (U457-025-G2-WPB)
5 Gbps (U457-025-G1-WPG)
SSD/HDD Supported 2.5 in. SATA I/II/III HDD/SSD
Operating Temperature 50° to 122°F (10° to 50°C)
Relative Humidity 10% to 80% RH, Non-Condensing
Dimensions 0.94 x 3.7 x 5.8 in. (24 x 94 x 148 mm)
Specifications
Produktspecifikationer
| Varumärke: | Tripp Lite |
| Kategori: | Inte kategoriserad |
| Modell: | U457-025-G2-WPB |
Behöver du hjälp?
Om du behöver hjälp med Tripp Lite U457-025-G2-WPB ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Tripp Lite Manualer
1 April 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
Inte kategoriserad Manualer
- Reolink
- Moleskine
- ICU
- Urrea
- Gys
- Feelworld
- Lynx Technik
- Sena
- Silver Cross
- Cascade Audio Engineering
- Home Easy
- Glem Gas
- Reer
- PureLink
- SWIT
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025