Trust AC-1000 Bruksanvisning
Trust
Smarth hem
AC-1000
Läs gratis den bruksanvisning för Trust AC-1000 (26 sidor) i kategorin Smarth hem. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 7.5 recensioner. Har du en fråga om Trust AC-1000 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/26
START-LINE
RECEIVER AC-1000
www.trustsmarthome.com
Item 71002 Version 1.0
Visit www.trustsmarthome.com
for the latest instructions
MAINS SOCKET SWITCH
USER MANUAL
MULTI LANGUAGE
2
4
1
3
1 sec.
ON
2x
5
6
7
1 sec.
2x
1 sec.
7 sec.
AC-1000 MAINS SOCKET SWITCH AC-1000 MAINS SOCKET SWITCH
1 2
1. Connect lamp/device and place receiver
First check if the lamp or device is turned on. Then plug the lamp or device into the receiver and plug
the receiver into a socket. Do not exceed the maximum load: 1000 W.
2. Activate learn-mode
Press the learn-button on the receiver for 1 second. The learn-mode will be active for 15 seconds,
during which the LED-indicator will blink slowly.
3. Assign transmitter code
Send an ON-signal with any Trust SmartHome transmitter while the learn-mode is active, to assign the
code to the receiver’s memory.
4. Code confirmation
The receiver will switch on/o 2 times to confirm the code has been received. The receiver can store
up to 6 dierent transmitter codes in its memory.
The memory will be preserved when the receiver is moved to another socket or in case of power
failure.
5. Manual operation with a Trust SmartHome transmitter
1. Press ON to switch the receiver on.
2. Press OFF to switch the receiver o.
6. Single code delete
1. Press the learn-button for 1 second. The learn-mode will be active for 15 seconds, during which
the LED-indicator will blink slowly.
2. While the learn-mode is active, send an OFF-signal of a specific TRUST SMART Home transmitter to
delete that code.
3. The receiver will switch on/o 2 times to confirm code deletion.
7. Full memory delete
1. Press and hold the learn-button of the receiver (approx. 7 sec.) untill the LED-indicator starts
blinking fast. The delete mode will be active for 15 seconds.
2. Press the learn-button again for 1 second while the delete mode is active.
3. The receiver will switch on/o 2 times to confirm memory deletion
EN EN
Produktspecifikationer
| Varumärke: | Trust |
| Kategori: | Smarth hem |
| Modell: | AC-1000 |
Behöver du hjälp?
Om du behöver hjälp med Trust AC-1000 ställ en fråga nedan och andra användare kommer att svara dig
Smarth hem Trust Manualer
11 September 2024
9 September 2024
28 Augusti 2024
27 Augusti 2024
16 Augusti 2024
16 Augusti 2024
12 Augusti 2024
5 Augusti 2024
2 Augusti 2024
1 Augusti 2024
Smarth hem Manualer
- Bosch
- SPC
- Xiaomi
- Hikvision
- Nexa
- Athom
- Sanus
- Cisco
- Intertechno
- LevelOne
- ETiger
- CyberPower
- Renkforce
- Lutron
- Sonoff
Nyaste Smarth hem Manualer
29 Mars 2025
29 Mars 2025
29 Mars 2025
27 Mars 2025
18 Mars 2025
18 Mars 2025
12 Mars 2025
26 Februari 2025
19 Februari 2025
18 Februari 2025