Turbosound TSTAND-01 Bruksanvisning

Turbosound Inte kategoriserad TSTAND-01

Läs gratis den bruksanvisning för Turbosound TSTAND-01 (7 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 12 recensioner. Har du en fråga om Turbosound TSTAND-01 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/7

Quick Start Guide

ACCESSORIES TSTAND-01

Lightweight Adjustable Speaker Stand for 1 ⁄" (35 mm) Pole Mounts

V 1.0

(EN) TSTAND-01 is a lightweight, adjustable aluminium speaker stand for mounting and elevating loudspeakers at a height of 4' 5" to 7' (1.35 m to 2.15 m).

TSTAND-01 connects to 1 ⁄" (35 mm) pole sockets and features a friction screw and locking pin for stable height adjustment.

To deploy TSTAND-01, follow these steps:

(1) Open the support legs:

a. First, loosen the lower friction screw in the sliding support collar by rotating the knob counter-clockwise.

b. Pull the support legs outward while pressing gently downward on the support collar.

c. Re-tighten the lower friction screw by rotating the knob clockwise until the friction screw holds the legs and support collar rmly in place against the

lower tube.

(2) Place the speaker stand on a stable surface.

(3) Adjust the stand height:

a. First, loosen the upper friction screw by rotating the knob counter-clockwise.

b. Slide the upper section of tubing up or down until you nd an acceptable height.

c. Re-tighten the upper friction screw by turning the knob clockwise until the friction screw holds the upper tube rmly in place.

(4) Guide your loudspeaker down onto the top of the speaker stand until the stand’s top is securely seated in the loudspeaker’s pole socket.

(5) If necessary, re-loosen the upper friction screw and adjust the upper section up or down until you nd your desired height. Then, re-tighten the friction

screw by rotating the knob clockwise until secure.