Ubiquiti Networks PBE-5AC-620 Bruksanvisning
Ubiquiti Networks
Wifi-repeater
PBE-5AC-620
Läs gratis den bruksanvisning för Ubiquiti Networks PBE-5AC-620 (28 sidor) i kategorin Wifi-repeater. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 14 recensioner. Har du en fråga om Ubiquiti Networks PBE-5AC-620 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/28
High-Performance
Integrated InnerFeed™
airMAX® ac Bridge
Model: PBE-5AC-620
Introduction
Thank you for purchasing the Ubiquiti Networks® PowerBeam
™ ac.
This Quick Start Guide is designed to guide you through the
installation, and show you how to access the airOS® Configuration
Interface. This Quick Start Guide also includes the warranty terms
and is for use with the
PowerBeam ac, modelPBE-5AC-620.
Package Contents
Dish Reflector with
Mounting Bracket
Antenna
Feed
Rear
Housing
Support
Arm
Upper Pole
Bracket Assembly
Lower Pole
Bracket
Brace Screws
(M6, Qty. 4)
Hex Head Bolts
(M8, Qty. 5)
Lock Washers
(M8, Qty. 5)
Flat Washers
(M8, Qty. 5)
Stabilizer Brackets
(Qty. 2)
M10x100 Bolts
(Qty. 2)
M8x150 Carriage Bolts
(Qty. 4)
High-Performance
Integrated InnerFeed ™
airMAX
®
ac Bridge
Model: PBE-5AC-620
Pole Clamps
(Qty. 2)
Gigabit PoE Adapter with
Wall-Mount Bracket
Power
Cord
Quick Start
Guide
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable™
is designed for outdoor installations. It is the customer’s responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.
Hardware Overview
Bottom View
Cable Door
Rear Housing
Technology
Ethernet Port
Release
Button Slot
Release Button
Dish
Reflector
Alignment Pins
Reset Button
Antenna Feed
Mounting Bracket
Reset Button To reset to factory defaults, press and hold the
Reset button for more than 10 seconds while the PowerBeam
is already poweredon. Alternatively, the PowerBeam may be
reset remotely via a Reset button located on the bottom of the
Gigabit PoE Adapter.
Release Button After you assemble the PowerBeam, check
the button; it should be fully engaged in the Release Release
Button Slot Rear Housing Antenna of the . This ensures that the
Feed is locked into place. If you need to remove the Antenna
Feed, you must depress the button first.Release
Produktspecifikationer
| Varumärke: | Ubiquiti Networks |
| Kategori: | Wifi-repeater |
| Modell: | PBE-5AC-620 |
Behöver du hjälp?
Om du behöver hjälp med Ubiquiti Networks PBE-5AC-620 ställ en fråga nedan och andra användare kommer att svara dig
Wifi-repeater Ubiquiti Networks Manualer
21 Februari 2025
20 Februari 2025
3 Oktober 2024
22 September 2024
20 September 2024
2 September 2024
28 Augusti 2024
25 Augusti 2024
16 Augusti 2024
Ubiquiti Networks LiteBeam AC Gen2 LBE-5AC-GEN2 Bruksanvisning
10 Augusti 2024Wifi-repeater Manualer
- Monacor
- Barox
- Davis
- EXSYS
- Universal Remote Control
- 7inova
- Mikrotik
- HELGI
- Mercusys
- Tycon Systems
- Amped Wireless
- Comtrend
- Nitek
- DJI
- Netgear
Nyaste Wifi-repeater Manualer
12 Juni 2025
11 Juni 2025
7 Juni 2025
1 Juni 2025
30 Mars 2025
30 Mars 2025
24 Mars 2025
3 Mars 2025
20 Februari 2025
20 Februari 2025