Ultimaker 2+ Bruksanvisning
Läs nedan 📖 manual på svenska för Ultimaker 2+ (46 sidor) i kategorin Skrivare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/46
Ultimaker 2+
Installation and user manual
Original manual v2.0 2019
2
Disclaimer
Please read and understand the contents of this installation and user manual carefully. Failure to read the manual
may lead to personal injury, inferior results or damage to the Ultimaker 2+. Always make sure that anyone who
uses the 3D printer knows and understand the contents of the manual and makes the most out of the Ultimaker 2+
or Ultimaker 2 Extended+.
The conditions or methods used for assembling, handling, storage, use or disposal* of the device are beyond our control
and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim
liability for loss, injuries, damage, or expense arising out of or in any way connected with the assembly, handling, storage,
use or disposal of the product.*
The information in this document was obtained from sources which we believe are reliable. However, the information is
provided without any warranty, express or implied, regarding its correctness.
Intended use Ultimaker 2+
Ultimaker 3D printers are designed and built for fused deposition modeling with Ultimaker engineering thermoplastics
within a commercial/business environment. The mixture of precision and speed makes the Ultimaker 3D printers the
perfect machine for concept models, functional prototypes and the production of small series. Although we achieved a
very high standard in the reproduction of 3D models with the usage of Ultimaker Cura, the user remains responsible to
qualify and validate the application of the printed object for its intended use, especially critical for applications in strictly
regulated areas like medical devices and aeronautics. While being an open material platform the best results will be
achieved with Ultimaker certified material, while effort has been made to match material properties with machine settings.
* We comply to the WEEE-directive.
Copyright © 2019 Ultimaker. All rights reserved worldwide.
This language version of the manual is verified by the manufacturer (Original manual).
No part of this publication, including pictures may be reproduced and/or made public, whether by printing, photocopying, microfilm or by
any other means whatsoever, without the prior written permission of Ultimaker.
3
Table of Contents
1. Safety and compliance 6
Safety messages 7
Hazards 8
2. Introduction 9
Main components Ultimaker 2 or Ultimaker 2 Extended+ 10
Specifications 11
3. Unpack and install the hardware 12
Unboxing 13
Installing the hardware accessories 15
4. Set up for rst use 17
Build plate leveling 18
Loading material 19
Installing Ultimaker Cura 20
5. Operation 21
Control and display 22
Material 23
Preparing a print with Ultimaker Cura 24
Starting a print 25
Removing the print 26
Changing the material and nozzle 27
6. Maintenance 28
Update the firmware 29
Build plate calibration 30
Storage and handling of materials 31
Hardware maintenance 32
Clean the printer 33
Lubricate the axles 36
Check for play on axles 37
Check for tension of short belts 38
Lubricate the lead screw of the Z motor 39
Retighten the hot-end isolator 40
Clean the feeder and replace the Bowden tube 41
7. Troubleshooting 42
Error messages 43
Clogged nozzle 44
Print quality issues 46
Produktspecifikationer
| Varumärke: | Ultimaker |
| Kategori: | Skrivare |
| Modell: | 2+ |
Behöver du hjälp?
Om du behöver hjälp med Ultimaker 2+ ställ en fråga nedan och andra användare kommer att svara dig
Skrivare Ultimaker Manualer
9 September 2024
30 Augusti 2024
28 Augusti 2024
20 Augusti 2024
3 Augusti 2024
2 Augusti 2024
Skrivare Manualer
- Skrivare Sony
- Skrivare Samsung
- Skrivare Xiaomi
- Skrivare LG
- Skrivare Huawei
- Skrivare HP
- Skrivare Panasonic
- Skrivare Epson
- Skrivare Honeywell
- Skrivare Olympus
- Skrivare Toshiba
- Skrivare Xerox
- Skrivare Canon
- Skrivare Agfaphoto
- Skrivare Brother
- Skrivare Sharp
- Skrivare Renkforce
- Skrivare Kodak
- Skrivare Lenovo
- Skrivare Polaroid
- Skrivare Sagem
- Skrivare Roland
- Skrivare Citizen
- Skrivare Nilox
- Skrivare Fujifilm
- Skrivare AVM
- Skrivare Konica Minolta
- Skrivare Mitsubishi
- Skrivare Velleman
- Skrivare Seiko
- Skrivare Argox
- Skrivare Oki
- Skrivare Royal Sovereign
- Skrivare Fujitsu
- Skrivare Digitus
- Skrivare Olympia
- Skrivare Dymo
- Skrivare Bixolon
- Skrivare Ricoh
- Skrivare Lexmark
- Skrivare Dell
- Skrivare Olivetti
- Skrivare Intermec
- Skrivare MSI
- Skrivare Zebra
- Skrivare D-Link
- Skrivare Kyocera
- Skrivare Minolta
- Skrivare DNP
- Skrivare GoDEX
- Skrivare Triumph-Adler
- Skrivare Oce
- Skrivare Testo
- Skrivare Metapace
- Skrivare Pantum
- Skrivare Ibm
- Skrivare Tomy
- Skrivare StarTech.com
- Skrivare Toshiba TEC
- Skrivare Frama
- Skrivare Builder
- Skrivare Kern
- Skrivare Kogan
- Skrivare Brady
- Skrivare ZKTeco
- Skrivare Star Micronics
- Skrivare Posiflex
- Skrivare Datamax-O'neil
- Skrivare Panduit
- Skrivare Dascom
- Skrivare HiTi
- Skrivare GG Image
- Skrivare Vupoint Solutions
- Skrivare Elite Screens
- Skrivare Primera
- Skrivare DTRONIC
- Skrivare Phoenix Contact
- Skrivare Videology
- Skrivare TSC
- Skrivare Star
- Skrivare EC Line
- Skrivare Colop
- Skrivare Equip
- Skrivare Approx
- Skrivare Fichero
- Skrivare Raspberry Pi
- Skrivare Epson 7620
- Skrivare Unitech
- Skrivare Middle Atlantic
- Skrivare IDP
- Skrivare Evolis
- Skrivare Fargo
- Skrivare Microboards
- Skrivare Tally Dascom
- Skrivare Custom
- Skrivare CSL
- Skrivare Nisca
- Skrivare Sawgrass
- Skrivare Mutoh
Nyaste Skrivare Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
3 April 2025
3 April 2025
3 April 2025
2 April 2025
2 April 2025