Uni-T UT268B Bruksanvisning
Läs gratis den bruksanvisning för Uni-T UT268B (15 sidor) i kategorin mätning. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 1.5 recensioner. Har du en fråga om Uni-T UT268B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/15
P/N:110401111944X
UT268B
1
Contents
I. Safety Information ..................................................................................... 2
II. Introduction ............................................................................................... 3
III. Basic Functions Introduction ..................................................................... 3
IV. Electrical Symbols ..................................................................................... 3
V. Technical Specifications ............................................................................ 4
1. Basic Operating Conditions ................................................................ 4
2. Rated Operating Conditions ............................................................... 4
3. General Specifications ...................................................................... 4
4. Performance Specifications................................................................ 6
VI. External Structure ..................................................................................... 7
VII. Operating Instructions ............................................................................... 8
1. Power On/Off .................................................................................... 8
2. Data Hold/Cancellation/Storage ........................................................ 8
3. Data Viewing/Exit .............................................................................. 8
4. Data Deletion .................................................................................... 8
5. Display Mode Switching ..................................................................... 9
6. Testing .............................................................................................. 9
VIII. Battery Charging ..................................................................................... 12
IX. Others ..................................................................................................... 12
X. Packing List ............................................................................................. 13
2
I. Safety Information
Thank you for purchasing the product. Before first use, please thoroughly read and
strictly follow the safety information and precautions listed in the user manual, to
avoid electric shock or personal injury.
The product is used for live working, for the sake of your safety, please follow
the national safe production regulations and safe operation procedures.
Please pay attention to the labeled words and symbols at the front and rear
panels.
Check if the product and its accessories are complete. Do not use if damage,
exposure or broken wire occurs. It is forbidden to use if rear cover and battery
cover are not closed in place. Stop use if metal exposure (caused by cracking of
casing or test lead) occurs during use.
Do not measure voltage over 600V. Do not use under strong electromagnetic
fields. It is forbidden to conduct test in places with inf lammable and dangerous
substances.
Be sure that the plug of the lead connects with terminal tightly, and that the
direction is correct when performing phase test. Remove the test lead from
measured conductor before disconnecting the test lead with the voltammeter. Do
not make contact with the terminal by hand, to avoid electric shock.
Do not operate the product by wet hand. Avoid rain from dripping on the product.
It is forbidden to use in damp state.
Do not place or keep the product in environments with high temperature, high
humidity, dew or direct sunlight for a long time.
Keep the product surface clean and dry. Do not use clean the product by
corrosives or coarse materials, please wipe the current clamp mildly by soft cloth
(i.e. glasses cloth) dipped with rust proof dehumidifying - lubricant.
Please refrain the voltammeter and the current clamps from impact and
dropping.
Use the product in specified measurement range and operating environments.
Use, disassembly, calibration and maintenance must be performed by
authorized qualified personnel.
The safety warning symbol “ ” in the user manual identifies that the operator
must perform safe operation according to the instructions.
The danger symbol “ ” in the user manual identifies that the operator must
strictly perform safe operation according to the instructions.
Produktspecifikationer
| Varumärke: | Uni-T |
| Kategori: | mätning |
| Modell: | UT268B |
Behöver du hjälp?
Om du behöver hjälp med Uni-T UT268B ställ en fråga nedan och andra användare kommer att svara dig
mätning Uni-T Manualer
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
14 Juni 2025
mätning Manualer
Nyaste mätning Manualer
15 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025