Uni-T UT362 Bruksanvisning

Uni-T Vindmätare UT362

Läs gratis den bruksanvisning för Uni-T UT362 (60 sidor) i kategorin Vindmätare. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 11 recensioner. Har du en fråga om Uni-T UT362 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/60

Anemoscopes

Overview

This Operating Manual covers information related to the safe operation of

the Anemoscope. Please read the relevant information carefully and observe

all the and strictly.Warnings Notes

Item

Description

English Operating Manual

USB Interface Cable (UT362) only

Software (UT362) only

9 V Battery Software

Qty

1 pc

Warning

To avoid electric shock or personal injury, read the "Safety Information"

carefully before using the Anemoscope.

Unpacking Inspection

Open the package case and take out the Meter. Check the following items

carefully for any missing or damaged part:

In the event you find any missing or damaged item, please contact your dealer

immediately.

In this manual, a identifies conditions and actions that pose hazards Warning

to the user, or may damage the anemoscopes or the equipment under test.

A identifies the information that user should pay attention to.Note

Safety Information

Warning

Before using the anemoscopes inspect the case,do not use the anemoscopes

if it is damaged or the case (or part of the case) is removed. Look for cracks

or missing plastic．

Pay attentions to the insulation around the connections.

To avoid possible electric shock or personal injury and to avoid possible damage

to the anemoscopes or to the equipment under test, adhere to the following rules

Do not touch the vane of the fan and the temperature sensor that are all

sensitive parts of the anemoscope, for it may affect normal operation of the

instrument.

Replace the battery as soon as the battery indicator appears．

If the anemoscope works abnormally, please stop using it and have it serviced

by nearby service center.

Do not use the anemoscopes in an environment of explosives, humidity, inflam

-mables. The performance of the anemoscopes may deteriorate after dampened.

Use the specific authorized replacement part if you need to repair the

anemoscopes

Do not use the anemoscope with the housing or cover opened.

Note the battery " + " and " - "pole when installing the battery.

The following conditions or actions may cause damage to the anemoscope,

please take caution when using the anemoscope.

Select the appropriate wind speed before use, it may avoid overloading

damage to the vane of the anemoscope fan(0~30m/s) under the unknown

scenarios.

Select the temperature meaning in 0 to 40 in order to avoid any fan

damage caused by the high temperature.

Do not try to recharge the battery.

The Anemoscope Structure (See Figure 1)

Fan

Wind Speed Indicator

Handle

Secondary Display

Primary Display

Power Button

Operational Keypad

Main Unit

Figure 1

Display Symbols (See Figure 2)

Figure 2

The table below offers information about the display symbols.

Number

Sign

MAX

MIN

AVE

Meaning

Display of Maximum Reading

Display of Minimum Reading

Data Hold is on

Display of Average Reading

The battery is Low

Secondary Data Display

Primary Data Display

Air Velocity Unit - Feet Per Minute

Air Velocity Unit - Meter Per Second

Temperature Unit

Cubic Feet Per Minute

Cubic Meter Per Minute

Knots Per Hour

Miles Per Hour

READ

REC NO.

USB

VEL

Reading Recorded Data is in Progress

Recording Data Number

USB is on

Air Velocity Measurement

ft/min

m/s

CFM

CMM

KNOTS

MPH

Keypad Description (See Figure 3)

Figure 3

Function Key Description

Long press to power on;

Short press to power off.

Download data through USB port (For UT362 only)

Description

In air velocity mode, it is used to switch from Max, Min to Real-

Time values;

In air flow mode, it is used to switch from Max to Min, Average,

2/3V Max. and Real-Time values;

In setup status, it is to add quickly.

Press once to enter the Hold mode. Press it again to

exit Hold mode. Long press press to open the backlight.

To switch between air velocity and flow measurement modes.

When viewing record data, it jumps on every 100 sets of data.

To switch from and temperature unit. When viewing data 　　　　　

in the memory, it's used to obtain the first recorded data.

Function Key

Short press to record current measured reading; Long press to

read the data in the memory.

Press and hold the button while turning on the anemoscope, all

recorded data in the memory will be cleared; When viewing the

recorded data, it's used to subtract quickly.

It is a functional menu button. Press and Hold it to configure the

anemoscope.

In air flow mode, it's used to move the decimal point randomly

when entering the Area value. START refers to decimal point

after the first input digit, NEXT is to move the decimal point for

next digit.

To set up the Area in air flow mode.

Confirmation key. See "Setting the Anemoscope"

Note:0~9 numeric buttons are used to key in Area value settable within 0.000

~9999 during air flow measurement.

UT361 and UT362 Anemoscopes are designed with built-in high precision

thermistor as air temperature sensor and a highly durable ruby vane ring to

maintain accurate and stable measurements, and also offer 8-digit micro-

processor for data processing. The instrument measures real-time air velocity

(m/s, km/h, ft/min, mph, knots), air flow(CFM, CMM) and air temperature( / ).

It also comes with remarkable features: dual display (Vel+Temp, Flow+Temp),

Max/Min/Average, data hold, data storage up to 2044 sets, auto power off,

PC communication (UT362 only).

To switch the units for air

velocity and flow. In velocity

mode, press the button to

switch from m/s→ft/min→

knots→km/h→mph units.

In air flow mode, press to

select between CFM and

CMM units.

UT361/362

Produktspecifikationer

Varumärke:	Uni-T
Kategori:	Vindmätare
Modell:	UT362
Vikt:	375 g
Bredd:	78 mm
Djup:	30 mm
Höjd:	162 mm
Automatisk avstängning:	Ja
Bakgrundsbelysning:	Ja
Batteriteknik:	Alkalisk
Produktens färg:	Grey, Red
Formfaktor:	Ficka/handhållen
Batterispänning:	9 V
Displaytyp:	LCD
Strömkälla:	Batteri
Temperatur mätenheter:	F, °C
Display inkluderad:	Ja
Intervall för temperaturmätning:	0 - 40 ° C
Vindhastighet mätområde:	2 - 30 m/s
Vindhastighet mätenheter:	m/s