Uniden UPP 1000 Bruksanvisning
Uniden
Inte kategoriserad
UPP 1000
Läs gratis den bruksanvisning för Uniden UPP 1000 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 2 recensioner. Har du en fråga om Uniden UPP 1000 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
Portable Power Bank &
Jump Start Kit
UPP1000
© 2019 Uniden Australia Pty Limited.
Printed in PRC V1.0
For more exciting new products please visit our website:
Australia: www.uniden.com.au
USING THE UPP1000 POWER BANK
CHARGING THE UNIT
1. Connect the unit and the power source via the USB C cable or
Micro USB cable.
2. While charging the unit, the battery level indicator light will ash.
The battery level indicator will stay solid with when charging is
complete.
3. Disconnect the UPP1000 when fully charged.
To preserve battery life, fully charge the Power Bank every three
months.
CHARGING USB DEVICE (TABLET, CELL PHONE, ETC.)
1. Connect the unit and smart phones or other electronic devices with
the included USB cable.
2. The UPP1000 begins to charge your device provided the unit has
enough power.
3. Unplug the USB cable when electronic devices are fully charged.
CHECK BATTERY CAPACITY
Press the button without any devices connected to the POWER
charger. The number of bars in the battery icon indicate the power in
the battery, 25%, 50%, 75% and 100%.
TURN ON LED FLASHLIGHT
Press the button to turn on the unit. Then press and hold the POWER
POWER button to turn on the LED ashlight. Press the POWER button
again to cycle through the 3 modes: Steady, SOS and Fast Strobe.
- 1 - - 2 -
POWER Button
Battery Level Indicator
Micro USB Input Port
Flashlight
Jump Start Cable
Connector
USB Type-C Input &
Output Port
2 USB Output Port
• 10000mAh Capacity
• Universal 12V Jump Start
clamps
• Supports Engines
< 7.0L Petrol
< 5.0L Diesel
• LED Flashlight
• USB Output:
5V/3A, 9V/2A, 12V/1.5A
• USB Type-C Input & Output:
5V/3A, 9V/2A, 12V/1.5A
• Resting Discharge
– 20% Loss/Year
• Carry Pouch
FEATURES
WHAT’S INCLUDED
• UPP1000 Jump Starter Unit
• Smart Jumper Cable Adaptor
• USB Cables (Micro, Mini
& Type-C)
• Cigarette Lighter Charger
(vehicle adaptor)
• Wall Charger
• Carry Pouch
UPP1000 OVERVIEW
- 3 - - 4 -
MAINTENANCE
Check the battery level of the unit at least once every three months and
charge the unit regularly. Please handle the product with care and store
the unit in a shaded, well-ventilated area. Avoid dropping or striking the
product heavily and repeatedly.
Do not use the unit to start a bulging car battery, disassemble or modify
and use detergents to clean the unit. DO NOT place the products in a
high-temperature environment for long.
BATTERY DISPOSAL
The battery is self-contained and not consumer replaceable. The battery
must be disposed properly when it no longer holds a charge. Proper
charging practices will prolong the shelf life of the unit.
SPECIFICATIONS
UPP1000
Capacity 10000mAh/37WH
Start Current 500A (last for 1s)
Peak Current 1000A (last for 0.2s)
Micro USB Input 5V/2.4A Max
USB Output 1 5V/3A, 9V/2A, 12V/1.5A Max
USB Output 2 5V/3A, 9V/2A, 12V/1.5A Max
USB Type-C Input & Output 5V/3A, 9V/2A, 12V/1.5A Max
USB Type-C Power 18W Max
Short Circuit Protection Yes
Over-discharge Protection Yes
Reverse Polarity Protection Yes
Reverse Charging Protection Yes
Cycle life 1,000 times
Operating Temperature – 20 ~ + 60 C° °
JUMP START A VEHICLE
1. Insert the plug of the smart battery clamp completely into the jump
starter.
2. Connect the red clamp to the positive terminal (+) of the car battery
and connect the black clamp to the negative terminal (-) of the car
battery.
3. Start your car.
If you failed to start your car, you need to disconnect the battery
clamp from the vehicle and the jump starter. Wait for at least 30
seconds, then try again.
If you failed to start your car after 3 attempts, you can press and
hold the force start button for 3 seconds until the indicator light of
the smart clamp turns solid green, you need to start the vehicle
within 30 seconds.
4. Once your car is started, remove the battery clamp from the car
battery and the jump starter within 30 seconds.
Indicator Light Smart Battery Clamp Status
Red and green lights
ashing alternately
In standby mode, ready to use aer you correctly con-
nected polarity of clamps and battery terminal
Solid green light Force start function is ready to use.
Solid red light Battery clamp is reversely connected, or short-circuit-
ed.
Red light ashing e over-temperature protection is triggered because
the temperature of the clamp exceeds 60°C. e out-
put would be automatically shut o. e red indicator
light would ash.
When the temperature drop lower than 55°C , the red
and green indicator light would ash alternately.
Green light ashing e voltage of the unit is too low. You need to charge
the product in time.
Produktspecifikationer
| Varumärke: | Uniden |
| Kategori: | Inte kategoriserad |
| Modell: | UPP 1000 |
Behöver du hjälp?
Om du behöver hjälp med Uniden UPP 1000 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Uniden Manualer
8 Januari 2025
5 Januari 2025
23 December 2024
15 Oktober 2024
3 Oktober 2024
1 Oktober 2024
27 September 2024
21 September 2024
21 September 2024
20 September 2024
Inte kategoriserad Manualer
- Promate
- Deye
- Crazy Tube Circuits
- Metz
- Bentley
- Essenza
- Medicinalis
- Heinner
- RCBS
- West Elm
- Airlive
- Urban Glide
- Soma
- Hypnos
- Nivian
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025