UPM EM130 Bruksanvisning

UPM Energikostnadsmätare EM130

Läs nedan 📖 manual på svenska för UPM EM130 (18 sidor) i kategorin Energikostnadsmätare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/18

EM130 is an energy meter

that allows you to measure

the amount of electricity used

by an appliance. It enables

you to enter the electricity

price per Kilowatt Hour (Kwh)

for two different time periods

to calculate the total cost of

an appliance's power

consumption, and to monitor

the electricity usage. It also

detects energy overloads

and records the maximum

wattage, while recording the

time of the occurrence.

EM130

Dual rate energy meter

W RO NE ’S

ALMANU

ATUFE RES

Energy monitor and

consumption tracking

Maximum current load

and wattage readings

Energy cost calculation

Energy usage time

Overload warning

Dual price

TABLE OF CONTENTS

Batteries......................................................................................................3

LCD Display and Buttons...........................................................................4

Energy or measurement mode ..................................................................5

ENERGY MODE.........................................................................................6

1) Voltage / Frequency...............................................................................6

2) Amperage / Power Factor ......................................................................6

3) Wattage ..................................................................................................7

4) Maximum Wattage .................................................................................7

5) Kilowatt ...................................................................................................8

6) Cost Total / On Time...............................................................................8

COST TOTAL / ON TIME ..........................................................................9

Clock Setting ..............................................................................................10

PRICE MODE ............................................................................................11

1) Enter Energy Price(s).............................................................................12

2) Maximum Load.......................................................................................14

Troubleshooting .........................................................................................16

Technical Specifications.............................................................................17

Warranty .....................................................................................................18

BATTERIES

Your new energy meter comes with two button cell batteries already installed.

To begin operation, you must first remove the ribbon from the battery

compartment located at the back of the unit.

1Carefully pull out the ribbon from

the battery compartment;

this will activate the batteries.

Ensure the two button cell batteries

are properly in place, then replace the

battery cover. (Be careful not to bend

any of the metal contacts

To replace batteries that are worn

out, remove the battery cover.

Replace batteries as required to ensure the proper operation of this unit.

The batteries serve as a memory backup for the readouts and settings.

If the energy meter is not in use for an extended period of time it is

recommended to remove the batteries from the unit.

Produktspecifikationer

Varumärke:	UPM
Kategori:	Energikostnadsmätare
Modell:	EM130
Vikt:	800 g
Bredd:	63 mm
Djup:	180 mm
Höjd:	35.5 mm
Internationell säkerhetskod (IP):	IP20
Hållbarhetscertifikat:	RoHS
Uteffekt:	75 W
Spännande:	71 V
AC-ingångsspänning:	100 - 305 V