Valcom S-525 Bruksanvisning

Läs gratis den bruksanvisning för Valcom S-525 (3 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2 recensioner. Har du en fråga om Valcom S-525 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Issue 1

1947442

P-TEC VOICE PAGING SPEAKER

S-525

INTRODUCTION

Clarity P-TEC Voice Paging Speakers are suitable

for voice paging as well as background music.

The S-525 is a 70 Volt model with adjustable taps

and volume control. P-TEC speakers consist of a

3.6 inch cone speaker mounted in a unique

surface-mount baffle. The baffle is designed for

mounting on acoustic tile, such as those normally

found in suspended-ceilings; and can be mounted

without cutting large holes in the tile. The mount-

ing pins can be removed for mounting in a hard

ceiling. The speaker housing has screw holes for

securing speaker without mounting pins. Although

the P-TEC speakers are designed especially for

standard suspended ceilings, they can be used on

many types of ceiling materials. P-TEC speakers

are not suitable for use in plenum ceiling

environments.

DIMENSIONS/WEIGHT

•8.00”Dia. x 2.50”D (20.32cm x 6.35cm)

1.25 lbs. (.57 kg)

INSTALLATION

Selecting the Power-Tap Wire

1.Remove the Quick-Connect connector from

the accessory pack.

2.Select the desired power-tap wire:

Yellow=1/4 Watt

Red=1/2 Watt

Green=1 Watt

White=2 Watt

Blue=4 Watt

Note: Refer to spacing chart (Figure 6) for recom-

mended speaker spacing.

Figure 1. 70 Volt P-TEC Paging Speaker

3.Install the Quick-Connect connector on the

wire. Use pliers to close the connector over

the wire. The connector can be removed by

prying it open with a screwdriver, and can be

reused several times (See Figure 2).

Figure 2. Attaching the Reuseable Quick-Connect

Connector

Volume Control

Reusable

Quick-Conne

ct

Connector

Tap Wire

Produktspecifikationer