Vanson SMP-27WME Bruksanvisning

Vanson Inte kategoriserad SMP-27WME

Läs gratis den bruksanvisning för Vanson SMP-27WME (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 9.5 recensioner. Har du en fråga om Vanson SMP-27WME eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/5

English

GREAT BRITAIN

customer service tel: 0845 300 9799 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.com/uk

Ver. 20140903

AC/DC adaptor

Art.no 18-2933 / 36-5930

Model SMP-27WME-UK / SMP-27WME

Please read theentire instruction manual

before using theproduct and then save it

for future reference. Wereserve theright

for any errors in text or images and any

necessary changes made to technicaldata.

Intheevent of technical problems or other

queries, please contact our Customer

Services.

Use

1. Make sure that theconnected device’s

power consumption does not exceed

theadaptor’s maximum outputpower.

2. Find out which of theprovided DC

connectors ﬁts your product (try them

for size loose).

3. There are two polarities for DC voltage,

positive and negative. TheAC/

DC adaptor is made for devices

with apositive (+) or negative (−)

central conductor. Thepolarity of

theinterchangeable DC connectors can

be reversed to thecorrect polarity.

4. Check thepolarity markings on thepro-

duct you wish to connect, adjust theDC

connectors likethis:

- Negative (−) on thecentrepin:

Turn theDC connector so that

the (−) symbol is seen in front of

theTIPmark.

- Positive (+) on thecentrepin:

Turn theDC connector so that

the (+) symbol is seen in front of

theTIPmark.

5. Make sure that theDC connector

is pressed all theway into thecable

connection.

6. Set thedesired output voltage (3 V/5 V/

6 V/7.5 V/9 V/12 V) using asmall

screwdriver and plug thecable with

thecorrect DC connector on theend

into thesocket of thedevice to be

7. Connect theadaptor to apower point,

theLED should lightup.

8. Switch on theconnected device.

Warning:

• Thewrong voltage or polarity can

damage theconnected device.

• Only connect devices that have apower

consumption of max 27 W.

• Turn off theconnected device before

connecting/disconnecting theadaptor.

• Do not position theadapter where it is

exposed to moisture orwater.

Specifications

Rated voltage: 100–240 V AC, 50/60 Hz

Output voltage (stabilized): 3V/5 V/6 V/

7.5 V/9 V/12 V, max2.25 A

Disposal

This product should be disposed of in

accordance with local regulations. Ifyou are

unsure how to proceed, contact your local

council.

Produktspecifikationer

Varumärke:	Vanson
Kategori:	Inte kategoriserad
Modell:	SMP-27WME
Färg på produkten:	Black, White
Färg:	Ja
Internationell säkerhetskod (IP):	IP66
Skärm diagonal:	- "
Processormodel:	Hi3520
Inkluderar operativsystem:	Linux Embedded
Placeringsstöd:	Binnen/buiten
Anslutningsteknik:	Bedraad
Ethernet LAN:	Ja
Typ av strömkälla:	DC
Minimal belysning:	0.01 Lux
Antal kameror:	4
Integrerad minneskortläsare:	Nee
LED-typ:	IR
Antal USB 2.0-portar:	2
VGA (D-Sub) port(ar):	1
Antal HDMI-portar:	1
Antal Ethernet LAN (RJ-45)-portar:	1
Optisk sensorstorlek:	1/4 "
Kamerans slutartid:	1/25 - 1/25000 s
vitbalans:	Auto
Nattläge:	Ja
Ljudingångar:	1
Ljudutgång:	1
Typ av lagringsmedia:	HDD
Inbyggd kamera:	Ja
Ethernet-gränssnittstyp:	Fast Ethernet
HDD-gränssnitt:	SATA
Kameraupplösning:	1280 x 720 Pixels
Antal kanaler:	8 kanalen
Rörelsesensor:	Ja
Maximalt antal hårddiskar per hölje:	1
BNC-ingångsportar:	8
Night vision scope:	30 m
Antal LED-belysning:	36
Drifttemperatur (TT):	-10 - 50 °C
Relativ luftfuktighet i drift (VV):	30 - 80 procent
RS-485-portar:	1
Maximal hårddiskkapacitet:	6000 GB
Säkerhetskamera formfaktor:	Rond
Kameragränssnitt:	BNC
Inkluderar brännare:	Ja
Händelseloggning:	Ja