Vantage Point PTC20 Bruksanvisning

Vantage Point Inte kategoriserad PTC20

Läs gratis den bruksanvisning för Vantage Point PTC20 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 10 recensioner. Har du en fråga om Vantage Point PTC20 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Preview all 7 steps before beginning. Should any portion of these instructions be unclear, contact a qualified contractor, handyman or call us

direct at 800-582-9595 for assistance. Do not attempt to install this Vantage Point television ceiling mount if you have any doubts as to its proper

installation. CAUTION- This Television Ceiling Mount is intended for use only with maximum weight indicated. Use with heavier than the maximum

weights indicated may result in instability causing possible injury. Use of this product for any other purpose unless specified by Vantage Point

Products is not recommended. Think safety first!

Δ INDICATES TO NOTE CAUTION, WHICH IF NEGLECTED MAY RESULT IN AN IMPROPER OR UNSTABLE ASSEMBLY.

Before placing the television on the ceiling mount, slide the safety strap (K)

through both front slots on the platform (E), as shown. Have the safety strap

(K) hang down from the platform ready for the television placement. Next, with

adequate assistance place the television on the ceiling mount and secure the

safety strap (K) immediately, as shown.

Δ Deter tampering with the safety strap (K) by locating the strap buckle on the

top of the television.

SPECIFICATIONS and RATINGS

TV SIZE MODEL # IN BLACK MODEL # IN WHITE MAX. LOAD LISTED

13" – 17" PTC13-B PTC13-W 60 LBS. YES*

19" – 21" PTC20-B PTC20-W 60 LBS. YES*

25" – 27" PTC26-B PTC26-W 80 LBS. YES*

* TESTED TO 4 TIMES MAX. LOAD RATING By Underwriters Laboratories Inc.®

Installed at

factory

Installed

at factory

Step 7

Television

Ceiling Mount Instructions

For Models PTC13 and PTC20

Vantage Point Products Corp. • P.O. Box 2485, Santa Fe Springs, CA 90670

U.S.A. Tel: 562.946.1718 • Canada Tel: 905.607.9994 • Web Site: www.vanptc.com • Email: cons-serv@vanptc.com

FIG. ITEM DESCRIPTION QTY

A Platform Bolt 3/8”-16 x 2-1/2” custom hex head bolt 2

B Indexing Washer 3/8” custom indexing flat washer 4

C Ceiling Plate Steel ceiling plate 1

D Plastic Cover Plastic rounded ceiling plate cover 1

E Platform Steel platform 1

F Bearing Ring 3” plastic bearing ring 2

(installed at factory)

G Steel Frame “C” shaped tubular steel arm 1

H Flange Nut 3/8”-16 serrated flange nut 2

I Dome Cap 3” plastic Dome cap 2

J Lag Screw #14 x 2-1/2” hex head lag screws 4

K Safety Strap 1-1/2” polypropylene strap 1

All VANTAGE POINT products are manufactured to ensure superior quality, performance and durability for a lifetime of use. Warranty covers the product to be free

from defects in the materials and workmanship under normal and reasonable use. Vantage Point Products will repair or replace, at our option, any product which

proves to be defective upon our inspection. This warranty will not apply to products which have been lost or damaged by misuse, abuse or accident, altered or

repaired in any way by any person or firm other than us, used in violation of instructions or an incorrect assembly nor used in a manner other than specified by

us. The warranty is nontransferable to a new owner and may require proof of purchase. All claims must be directly handled with Vantage Point Products Corp.

6i04-07/03

Tools

Required