Vemer TM NiPt-P3D Bruksanvisning
Sidor 12 Engelska Termometer
Läs bruksanvisningen för Vemer TM NiPt-P3D gratis online eller ladda ner PDF:en. Bruksanvisningen har visats 32 gånger. Fråga om modellen? Ställ en fråga
- 13-
User Manual Digital Thermometers
English
■Safety warningsPage 13
■Technical specifications Page14
■Description of instrument Page15
■Electrical connectionsPage15
■OperationPage15
■Setting the parametersPage16
■Parameter menu Page17
■Error messagesPage19
■Reference standards Page19
■Dimensions and connection diagrams 33x75 mmPages20-21
■Dimensions and connection diagrams 72x72 mmPages22-23
CONTENTS
■During the installation and operation of the instrument, the
following instructions should be adhered to:
1)The instrument should be installed by a skilled person.
2) Always follow the connection diagrams closely to install the
instrument.
3)Do not power or connect the instrument if any part of it is
damaged.
4)Before touching the terminals, make sure the wires to be
connected to the instrument are not live.
5)The connection cables should be able to resist the maximum
operating temperature (Tmax), obtained from the sum of the
maximum ambient temperature (Ta) + a temperature of 20 °C
(Tmax= Ta + 20 °C)
6)The instruments guarantee main insulation between the low
voltage parts (250 V) and the very low voltage parts.
7)Any external switches connected to the control should guarantee
a minimum insulation at the operating temperature of 250 V AC
or should be protected by an equivalent insulation.
8)The instruments require no maintenance.
SAFETY WARNINGS
Produktspecifikationer
| Varumärke: | Vemer |
| Kategori: | Termometer |
| Modell: | TM NiPt-P3D |
| Färg på produkten: | Black, Grey, Red |
| Vikt: | 940 g |
| Bredd: | 155 mm |
| Djup: | 245 mm |
| Höjd: | 110 mm |
| Förpackningens vikt: | 1300 g |
| Maximalt luftflöde: | 160 l/min |
| Tomgångsvarvtal (min): | 10500 RPM |
| Maximal arbetsbelastning: | 6.3 bar |
| Typ av slipmaskin: | Orbiltal sander |
Behöver du hjälp?
Om du behöver hjälp med Vemer TM NiPt-P3D ställ en fråga nedan och andra användare kommer att svara dig