Vicoustic Vixagon VMT Bruksanvisning
Vicoustic
Inte kategoriserad
Vixagon VMT
Läs gratis den bruksanvisning för Vicoustic Vixagon VMT (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 10.5 recensioner. Har du en fråga om Vicoustic Vixagon VMT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
EN
Vixagon VMT
Installation Manual
Measuring Tape
EN
Not Included
Level
MATERIAL NEEDED
Included
Glue
Available formats
700x607x20mm
355x305x20mm
700x607x40mm
Velcro Male
Vixagon
700x607x20mm (x12/ box)
700x607x40mm (x6/box)
Vixagon Mini
355x305x20mm
(x 36+36/box)
(x 12+12/box)
Measure the desired
distance between panels
and apply the remaining
panels.
A
B
Wall and ceilling surfaces should be examined prior to
installation, ensuring they are clean, smooth, and dry. If you have
unpainted gypsum board surfaces, these should be primed with
a drywall primer (or another material manufactured especially
for the purpose), to equalize the absorption between the gypsum
board face paper, joint compound, and skin coating materials.
You should then apply the paint, and allow air circulation in order
to dry the paint within the time frame specied by the paint
manufacturer. Please ensure the paint is dry before installing
the acoustic panel. Make sure the room has all the necessary
conditions to receive the acoustic panels. After you apply the
glue on the back of each acoustic panel, please ensure you hold
the acoustic panel against the wall the required time (mentioned
above), and ensure it stays xed in place. This method is also
applicable to ceiling installations.
For the installation of Vixagon VMT
on the ceiling, we recommend using
Flexi Glue Ultra.
To ensure that you maximise the
strength of the glue, don’t make
any adjustments to the panel after
bonding.
!
Do not apply VixagonVMT behind
radiators or too close to a heat
source.
EN
Place the panel on the suitably
chose position on the wall. Once
in the desired place, press rmly
against the wall for 15 seconds.
3
Velcro stripes
1 2
Apply the Glue on the back of the
acoustic panel, near
the edges. Do not wait longer than
10 minutes after applying the glue
to attach the panel to the wall.
Produktspecifikationer
| Varumärke: | Vicoustic |
| Kategori: | Inte kategoriserad |
| Modell: | Vixagon VMT |
Behöver du hjälp?
Om du behöver hjälp med Vicoustic Vixagon VMT ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Vicoustic Manualer
13 Mars 2025
25 September 2024
25 September 2024
25 September 2024
25 September 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
Inte kategoriserad Manualer
- Blaze
- Zoom
- Patton
- Yaesu
- MYVU
- JOBY
- Theben
- JETI
- NuPrime
- Vertex
- Melnor
- Omnitronic
- PS Audio
- Lund
- Busch-Jaeger
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025