Victron BlueSolar PWM DUO LCD SB 12 24V 20A Bruksanvisning

Victron Batteriladdare BlueSolar PWM DUO LCD SB 12 24V 20A

Läs gratis den bruksanvisning för Victron BlueSolar PWM DUO LCD SB 12 24V 20A (75 sidor) i kategorin Batteriladdare. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 7 recensioner. Har du en fråga om Victron BlueSolar PWM DUO LCD SB 12 24V 20A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/75
Manual
EN
Handleiding
NL
Manuel
FR
Handbuch
DE
Manual
ES
Manual
SV
Manuale
IT
Manuál
CZ
Руководство по
эксплуатации
RU
BlueSolar PWM DUO-LCD-USB
1
EN NL FR DE ES SE IT CZ RU
1. General Information
The BlueSolar PWM DUO 12V|24V|20A LCD-USB series uses Pulse Width Modulation
(PWM) charge voltage control combined with a multistage charge control algorithm. This
leads to superior charging and enhanced battery performance. The filtered PWM power
control system uses highly efficient and reliable power MOSFET transistors.
2. Features
Three stage battery charging [bulk absorption float]
External Temperature sensor included
2 Battery outputs for 2 separate batteries.
Battery type: Lead-Acid and LiFePO4
Protected against reverse polarity connection of the solar panels and/or battery.
USB output for charging telephones and tablets.
Temperature protection.
3. Installation
IMPORTANT
Always connect battery 1 first, in order to allow the Controller to
recognize system voltage.
Use a 12V (36 cells) solar array for a 12V system.
Use a 24V (72 cells) solar array for a 24V system.
Important note: always connect the battery 1 first.

Produktspecifikationer

Varumärke: Victron
Kategori: Batteriladdare
Modell: BlueSolar PWM DUO LCD SB 12 24V 20A

Behöver du hjälp?

Om du behöver hjälp med Victron BlueSolar PWM DUO LCD SB 12 24V 20A ställ en fråga nedan och andra användare kommer att svara dig