Viewsonic PJ-IWBADP-004 Bruksanvisning

Viewsonic Projektor tillbehör PJ-IWBADP-004

Läs gratis den bruksanvisning för Viewsonic PJ-IWBADP-004 (1 sidor) i kategorin Projektor tillbehör. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 3 recensioner. Har du en fråga om Viewsonic PJ-IWBADP-004 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/1

Installation Instructions

Adapter Plate

ViewSonic Corporation

10 Pointe Drive

Brea, CA 92821

www.viewsonic.com (800) 688-6688

Made in USA

Parts Included

Attach the Adapter Plate

Attaching to Promethean Arm

5- #10 Washers

4- 4mm x 12mm FHMS5- 4mm x 10mm PHMS

Attach Promethean Bracket

2If Dome is not Centered

1. Place (4) spacers over the threaded inserts on

the bottom of the projector. Attach Adapter Plate to

Projector with (4) 4mm x 12mm FHMS

2. Attach Promethean Bracket to Adapter Plate with

(5) 4mm x 10mm PHMS & (5) Washers

3. If dome is not centered with lens on installation,

remove Dome from Promethean Bracket.

Attach the Adapter Plate

Attaching to Smart Arm

1Screw in Adapter Plate

1. Place four spacers over the threaded inserts on

the bottom of the projector.

2. Place Adapter Plate onto the bottom of projector,

aligning mounting holes on bracket with threaded

inserts on the bottom of projector, and line up with

the center of the projector lens.

3. Attach Adapter Plate to Projector with (4) 4mm x 12mm FHMS

4. Lift Adapter Plate with projector up to end of the existing SMART Board projector mount arm, and slide

interface bracket slots onto hooks.

5. Fasten interface bracket to end of SMART Board projector arm using one 1/4-20 x 3/8" THMS

Bracket at end of

SMART Board projector

mount arm (remainder

of arm not shown)

WALL

1- 1/4-20 x 3/8" THMS

Adapter Plate

TOP VIEW

LENS

Align Dome to Len's Center

4Lens is Centered

4. Replace Dome on next set of holes on the

Promethean Bracket

5. Dome is now directly over Projector Lens

4- 1/8" Spacers

Promethean Smart Board

4- #10 Washers1/4 Fender Washer Adapter Plate 4- 1/8" Spacer

1- 1/4-20 x 3/8" THMS 4- 4mm x 12mm FHMS

Produktspecifikationer

Varumärke:	Viewsonic
Kategori:	Projektor tillbehör
Modell:	PJ-IWBADP-004
Färg på produkten:	Black, Stainless steel
Vikt:	4400 g
Bredd:	1620 mm
Djup:	2000 mm
Höjd:	1620 mm
Snäll:	Staande mixer
Husmaterial:	Roestvrijstaal
Antal hastigheter:	6
Tillgångar:	800 W
Innehåll behållare/burk:	1.5 l
Varierande hastighet:	Ja
Iskross:	Ja
Antihalkfötter:	Ja
Skålmaterial:	Glas
Turboknapp:	Nee
Knivmaterial:	Staal
Tillbehör som tål diskmaskin:	Ja
Rotationshastighet:	22000 RPM