Vitek VTC-BRE24F Bruksanvisning
Vitek
Inte kategoriserad
VTC-BRE24F
Läs gratis den bruksanvisning för Vitek VTC-BRE24F (19 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 3.5 recensioner. Har du en fråga om Vitek VTC-BRE24F eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/19
VITEK
• 1/3” High Resolution CCD
• 700 TV Lines of Resolution (960H)
• E-WDR by Adaptive Tone Reproduction
• 24 Dynamic Infrared LEDs with up to 65’ Range
• 0.003 Lux / 0 Lux with IR LEDs On
• IR Corrected 3.6mm Fixed Iris Lens
• 2DNR Noise Reduction
• Motion Detection, Privacy Masking & Highlight Masking
• OSD (On Screen Display) menu
• 12 VDC Operation
VTC-BRE24F
Day/Night 960H Infrared
Ball Camera
CAUTION:
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.
Only operate this apparatus from the type of power source indicated on the label.
The company shall not be liable for any damages arising out of any improper use, even if we
have been advised of the possibility of such damages.
PACKAGE CONTENTS
CONNECTION
1 x VTC-BRE24F Camera
1 x Mounting Bracket
1 x User Manual
1 x Hex Wrench
1 x Mounting Screws/Anchors Pack
1 x Mounting Template
1. Connect the camera video output to the monitor video input with a 75Ω coaxial
cable.
2. DC12V Input Terminal
Connect the power connector of the camera to a 12V DC regulated power supply.
NOTE: Please use the correct power adaptor, DC12V (regulated), to operate this
unit. The tolerance of this unit is DC12V ± 10%. Over the maximum DC12V power
input will damage the video output connector (VIDEO OUT).
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
The lightning fl ash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of suffi cient magnitude to constitute
a risk of electric shock to persons.
This exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
VTC BRE24F- - / VTC IRE24F
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of non - insulated
dangerous voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (se rvicing) instructions
in the literature accompanying the appliance.
This installation should be made by a qualified service person and should conform to all local codes.
Produktspecifikationer
| Varumärke: | Vitek |
| Kategori: | Inte kategoriserad |
| Modell: | VTC-BRE24F |
Behöver du hjälp?
Om du behöver hjälp med Vitek VTC-BRE24F ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Vitek Manualer
8 Oktober 2024
7 Oktober 2024
7 Oktober 2024
6 Oktober 2024
27 September 2024
24 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
Inte kategoriserad Manualer
- Ovation
- Forza
- Holman
- Osprey
- Muse
- Livarno Lux
- Festool
- Insteon
- Polarlite
- J. Rockett Audio Designs
- Pontec
- Sonnet
- YA-MAN
- Electrolux
- EtiamPro
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025