Vitek VTC-TTT28R2F Bruksanvisning
Vitek
Inte kategoriserad
VTC-TTT28R2F
Läs gratis den bruksanvisning för Vitek VTC-TTT28R2F (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 3.5 recensioner. Har du en fråga om Vitek VTC-TTT28R2F eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
ITEK
VITEK
FEATURES
• 1/3” 2.1 Megapixel Progressive Scan CMOS image sensor
• 2.1 MegaPixel Video Transmission over COAX cable at
distances of up to 1500’ using HD-TVI Technology*
• 2.8~12mm Varifocal Lens (VTC-TTT28R2V) / 3.6mm Fixed
Iris Lens (VTC-TTT28R2F)
• 28 Infrared LED’s with 70’ IR Range
• Digital Wide Dynamic Range (D-WDR)
• True Mechanical Day/Night function by ICR
• 3D-DNR Noise Reduction
• IP66 Weather Resistance
• 12VDC Operation
VTC-TTT28R2F
VTC-TTT28R2V
2.1 Megapixel Indoor/Outdoor
HD-TVI IR Turret Cameras
2
Safety Precaution
CAUTION: TO REDUCE THE RISK OF ELECTICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
To prevent electrical shock and risk of fire hazards, do not expose this unit
to rain or moisture and only use specified power source..
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Main power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power interruptions, it is
recommended that the device be powered from an uninterruptible power supply
(UPS).
The symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock.
3
Components and Accessories
Overview
This camera series supports both fixed and varifocal lenses. Please note
that the zoom and focus features mentioned below are not features of the
fixed lens version.
Fo cu s
Zoom
3
5
6
4
1
2
*Optional
Lens
Focus*
Zoom*
Lock Screws
Video Cable
Power Cable
1
2
3
4
5
6
Focus
Zoom
Camera
User Manual
Screws
Hex Wrench
Mounting Plate
Produktspecifikationer
| Varumärke: | Vitek |
| Kategori: | Inte kategoriserad |
| Modell: | VTC-TTT28R2F |
Behöver du hjälp?
Om du behöver hjälp med Vitek VTC-TTT28R2F ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Vitek Manualer
8 Oktober 2024
7 Oktober 2024
7 Oktober 2024
6 Oktober 2024
27 September 2024
24 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
Inte kategoriserad Manualer
- Babysense
- MDT
- Thetford
- Kidde
- Audibax
- ATN
- Platinet
- Aeris
- Intermatic
- Atlas
- Amiko
- Winston
- Bixolon
- Vanson
- Artex
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025